Comprehensive and unified control of security, building technology and communication systems installed in a property, initiation of the correct actions in case of emergency and receipt of concrete instructions for the optimal solution of the situation: quite simple with WinGuard PSIM from Advancis.

WinGuard NSC

WinGuard is an open architecture command & control platform to integrate and unify security, building automation and communication systems, e.g. fire alarm or intruder detection systems, access control or CCTV. Proprietary interfaces enable transfer of event messages as well as comprehensive control of all linked systems. All system states are collectively displayed in only one user interface. The user profits from a uniform and intuitive operation of a wide variety of different systems. In addition, WinGuard offers program-guided instructions for event processing – for a quick and secure management of the situation.
هوشمند سازی ساختمان با WinGuard NSC

WinGuard has an open system structure. From a single-user system to a comprehensive network solution, a WinGuard installation can be extended step by step with workstations, interface and function modules and therefore flexibly adapts to various tasks.

Using WinGuard as centralized management system reduces purchasing and maintenance costs for other control units as well as training costs. The modular extensibility of WinGuard offers high investment protection. Due to individually adapted modules for particular functions, systems, workflows or verticals, WinGuard also responds to specific requirements.

The advantages at a glance:

  • Standalone- or Network Systems (Client / Server)
  • Upgrade / Update Possibilities
  • Data points depending on Project (expandable in steps of 100 or 1000 Datapoints)
  • more than 200 different interfaces available, optimal for NSC Fire Control Panels
  • Easy and Reliable Data import from the NSC FCP Tool
  • Dual-Screen-Operation available as an option
  • User specific designed surface
  • predefined Users
  • integrated graphics editor to import wmf, bmp and jpg files (Import of CAD files as an option)
  • separated log file for each interface
  • Event handling included
  • Mobile App for smartphones and tablet PCs
  • Optical and acoustic alerts
  • Possibilities for redundancy

As a qualified WinGuard partner, we take care of planning, project planning, software setup, hardware installation and offer qualified services, support and training.

Single zone extinguishing control unit with the FCP Solution F2

The VdS approved fire control panel “Solution F2”, which has successfully established itself within several years on the market can now be used as an extinguishing control system for single areas.

Additionally to the known features:

 NSC Firefighting Control Panel features:

  • ۱–۲ loops, optional for addressable components by manufacturers either Apollo or Hochiki.
  • Power supply 230 VAC/24 VDC with 3.5 A.
  • Control panel with membrane keyboard and graphic display.
  • USB- and RS-232 interface.
  • Numerous In/Outputs.
  • Connectability for fire brigade periphery.
  • RS-485 interface card.
  • Single indication of detector groups.

The control panel is now capable to combine the standard FCP with an integrated electronic control device for fire extinguishing systems according to EN 12094-1.For this purpose, there is a new control board having a multiplicity of in- and outputs.

Multiple zone extinguishing control unit with the FCP Solution F1

Exactly the same control board, as for the single zone extinguishing control panel ”Solution F2”, can be mounted in the “Solution F1” to operate multiple extinguishing zones. nPer each extinguishing zone there is one display board with optional key switch for the essential display and eventually required operating functions.

Imen Aria Harigh company, has NSC distributor, so is able to provide installation and user training with these control panels.

for more informatuon about NSC control panel:

Imen Aria Harigh is NSC Agent in Iran.

As the Agent of NSC control panels, in addition to supplying standard NSC addressable devices, the company is able for:



*Setting up

* Training in all types of fire alarm and fire alarm systems.

نمایندگی NSC

The “Solution F1-6“ panel has as standard a 24 V DC power supply with max. current of 4.2 A.

The user can connect up to 6 loops – each with 254 loop devices (127 detectors/modules plus 127 loop sounder) –

to this panel and can organize a max. of 512 zones.

There are three standard housings which should be chosen depending on battery backup requirements.

The bigger model “Solution F1-18” has a 24 V DC power supply with max. current of 6.7 A fitted as standard.

This panel can control 18 loops as its maximum

NSC Control Panel model which is NSC Solution F1 has all needed approvals such as VDS and is one of the most powerful control panels in the world.

NSC Solution F1 control panel


  • ■ Graphics LCD module with 240 x 64 dots
    ■ Integral power supply with 4.2 A or alternative 6.7 A
    ■ Steel housing with brand new touch control panel
    ■ Interface for German Fire Brigade Control Panel
    ■ ۳ separate power outputs for transmission device / sounders / strobes
    ■ USB interface for configuration by PC
    ■ Up to 8 programmable push buttons
    ■ Redundant RS-485 interface
    ■ ۳ x RS-232 interfaces
    ■ ۲ monitored conventional zones in NSC Solution F1
    ■ ۱۶ digital outputs, programmable
    ■ ۸ digital inputs, monitored for “open-circuit”
    ■ ۴ relay change over contacts, programmable
    ■ Earth fault detection
    ■ Event log with max. 10,000 messages


■ ۲ to 18 loops are possible in one standard wall-mounted housing. Analogue addressable detectors and conventional detectors can be mixed in one Fire Control Panel.
■ User-friendly housings because of hinged frames which gives easy access for the technician to the wiring terminals.
■ ۳۲ Bit advanced CPU core – supplied as an upgradeable PCB module! This gives the possibility for smart software solutions and the possibility to change the micro processor very easily in the event of a new – higher performed – model in future or if one model become obsolete. In such a case the main board PCB of the “Solution F1” panel need not be exchanged or upgraded.
■ Generous memory space with 8 MB-Flash and 8 MB-RAM to allow convenient programming of links and customer specified texts.
■ Numerous running modes and detection algorithms are programmable at this new panel. In combination with analogue addressable detectors it can be perfectly adapted to every application of the market.

■ Multi protocol loop cards are available, which means that different analogue addressable detectors can be easily connected. These PCBs are able to check the loop for short circuit and wire break and detect a possible earth fault of the shielding.
■ Guaranteed 100 % compatibility to Hochiki ESP protocol as well as to Apollo XP95 / Discovery protocol in NSC Solution F1.
■ Network by ARCNET. This BUS system distinguishes by multi master ability which leads to a continuously running network even if the master node fails.
■ ۸ programmable push buttons allow a user-friendly handling of certain user defined operations.
■ Auto dynamic operating mode by the graphics display with assigned functional push buttons.
■ The texts on front fascia are easy to change for international versions of the “Solution F1”.


Some of NSC Control Panel Modules are as below:

nsc ISDN modem

Analogue or ISDN modem for operating the configuration software via telephone line

■ The modules can be plugged into a slot in the ”Solution F1”
Fire Control Panel. Data speed up to 64,000 bps and they use
the Fire Control Panel battery backup in case of mains failure.

nsc cpu

Full Redundant CPU Module
■ Additional plug-in module to achieve a full redundant main board
■ According to EN54 standard necessary if more than 512 detectors
are connected
■ VdS approval G 205 024

nsc arcnet interface card

ARCNET Interface card
■ To plug into a slot of the FCP main board
■ Connecting to the multi master communications
system with a maximum of 128 panels
■ Can be plugged into the FCP twice to realize a full
redundant network
■ Very high reliability
Technical specifications:
Operating voltage: 24 V DC
Current consumption: 30 mA
ARCNET Interface:
up to 128 nodes
Cable length:
max. 1,200 m
Weight: 0.1 kg
۸۰ x 48 x 20 mm

NSC Webserver Module
■ Permits the access to NSC Fire Control Panels via the
Internet without special software
■ Use of the www infrastructure à e.g. by means of
Internet Explorer, Firefox, Safari etc.
■ User administration for 30 users
■ Access by user name and password
■ ۹ different access authorizations
■ Indicates all messages / status of the FCP
■ Shows the complete event log
■ Online control of the Fire Alarm Panel front facia
■ Complete operation of the FCP Plug-in module
Technical specifications:
Quiescent current: 38 mA (24 V DC)
Linux O / S Software with 2.6.24 kernel
۱۰ / ۱۰۰ Mbps Ethernet LAN interface
۳۲ MB SDRAM, 32 MB NOR Flash
۳٫۳ V / 300 mA
Dimensions: 56 x 56 x 20 mm

NSC Solution F1 Control Panel Cards are as below:

Loop Cards :

nsc loop card کارت لوپ

Loop card for “Solution F1” with 2 loops / 4 stub lines
■ ۲ loops – each maximum 254 detectors / modules (Apollo: 2 x 126) –
or alternative 4 stub lines
■ cable length max. 3,500 m (2 x 2 x 0.8)
■ ۸ user programmable open collector outputs
■ up to 127 loop sounders per loop can be activated at the same time
■ cable shielding monitored for open and short circuit
■ Earth fault detection

۲٫ (Redundant Loop Cards)

nsc redundant loop card

Redundant Loop card for “Solution F1”
with 2 loops / 8 stub lines
■ As Loop card for “Solution F1” with 2 loops / 8 stub lines but
additionally with 100 % redundancy. This means the micro processor, the
RAM and the operating system memory are doubled on this card.
So there will be no failure in case of micro processor fault.

۳٫ Conventional Cards

nsc conventional card کارت متعارف

Conventional detector card for 8 stub lines
■ compatible to almost all conventional detectors on the market
■ ۳۲ detectors per line according German standards
■ ۸ programmable open collector alarm outputs
■ Earth fault detection
■ Failure mode in case of micro-processor fault

۴٫ (Redundant Conventional Cards)

nsc redundant conventional card

Conventional detector card with 100%
redundancy for 8 stub lines
■ as Conventional detector card for 8 stub lines but with 100 %.
That means the micro processor, the Ram and the operating system
memory are doubled on this card. So there will be no failure in case of
micro processor fault.

۵٫ Relay Card

nsc relay card کارت رله ان اس سی

Relay card with 8 change over contacts
■ compatible to F1 fire detection system but usable as a universal
device in other systems too
■ ۸ programmable change over contacts, each 250 V AC / 5 A

Download NSC Catalog 

Download NSC  Solution F1 control panel Softwareدانلود نرم افزار کنترل پنل NSC

NSC Fire Alarm Control Panel Solution F1

The “Solution F1“ fire control panel range is a new generation, modular and ultra modern fire control panels. These have been developed to meet international standards and to satisfy specific international requirements at the highest level.

  • Modular, intelligent hybrid fire control panel range
  • Supports Hochiki ESP and Apollo XP95 / Discovery detectors
  • ۲ – ۱۸ loops in one standard housing
  • Brand new touch control panel
  • Graphics LCD module 240 x 64 as standard included on basic model
  • Integral Power supply 24 V DC with max. 6.7 A or 4.2 A as standard included
  • ۳۲ bit high performance CPU
  • Flash memory up to 8 MB and RAM memory up to 8 MB
  • Many powerful features included
  • NSC Control Panel Configuration software operated via modem or USB interface
  • Full redundant main board and full redundant loop cards as options
  • To get a Download Link, Please Contact Us