دتکتور مکشی مدل ILQ-100

The ICAM ILQ detector is a cost-effective Aspirated Smoke Detection (ASD) solution that meets the unique needs of numerous small area applications of up to 100 m² (1,000 ft²). Examples of these include telco landline remote offices, base station controllers, remote base stations, small server rooms, data centre containers, critical equipment, packaged HVAC units, anechoic chambers, pump houses, generator enclosures, signalling huts and modular laboratories, just to name a few.
ILQ detectors are suitable for both high and normal sensitivity applications and offer many installation advantages in terms of out-of-box operation, stand-alone functionality and simplified pipe network.

How it Works

The ILQ detector actively draws air from the protected area through a pipe network where two or four holes are used. The ILQ has two pipe inlets and there are always one or two holes on each pipe. Sampled air is then filtered before being analyzed by the detection chamber. The detection chamber utilizes a laser light source and photoelectric receiver circuitry to detect scattered light caused by the presence of smoke. Alarm (Pre-Alarm & Fire) and Fault conditions are reported by activating the corresponding LEDs on the simple display and dry contact relays. The system allows configuration of both smoke alarm and flow fault thresholds to suit the application needs.

Configuration Options

Convenient and expedient configuration of the ILQ detector is available via DIP switches for true out-of-box operation. A USB communication interface is also available for the Xtralis QSC Configuration and Fire System Management Software application.

Inputs and Outputs

The ILQ detector provides a programmable General Purpose Input (GPI) for remote Reset, Reset + Disable, Stand-by and External Device (PSU) monitoring functions. Three dry contact relay outputs are available for Alarm and Fault annunciation.


ILQ-100 Air sampling Smoke Detector


• Laser-based absolute smoke detection
• Clean air barrier for optics protection
• Up to 100m² (1,000 ft²) coverage
• Up to 2 x 6 m (20 ft) linear or up to
2 x 9 m (30 ft) branched pipe lengths
• 2 or 4 Class A / VEWFD sampling holes
• Metric/Imperial pipe inlets
• Pre-alarm, Alarm and Fault Relays
• 5 LEDs, Pre-alarm, Fire, Fault, Filter,
• Monitored on-board filter
• AutoLearn™ Smoke
• General Purpose Input (GPI)
• IP30 enclosure
• Xtralis QSC support
• USB port for PC connection
• Event log
• Low power consumption
• Configuration via DIP switches
• Various mouting options

Listings / Approvals

• UL
• CE
• EN 54-20

Class A, B & C with 4 holes
• Other approvals pending
Regional approvals listings and regulatory compliance vary between
product models.


Supply voltage:
24 VDC nominal (18 to 30 VDC), externally supplied
Current consumption:
170 mA (quiescent), 190 mA (max)
Dimensions (WHD):
260 mm x 228 mm x 110 mm
(10.24 in x 8.98 in x 4.35 in)
1.2 Kg (2.65 lbs)
Operating conditions:
Recommended Detector Ambient: 0°C to 39°C(32°F to 103°F)*
Tested to: -10°C to 55°C (14°F to 131°F)
Humidity: 0% to 95% RH, non-condensingInlet Pipe Size Accepts both metric and imperial standard pipe sizes
Metric: 25 mm external diameter
Imperial: 1.05 in (3/4” pipe) external diameter
Sampling network:
Pipe Length: Up to 2 x 6 m (2 x 20 ft) linear, up to 2 x 9 m (2 x 30 ft) branched
Sampling Holes: 2 or 4 (1 or 2 per pipe)
Sensitivity Range:
0.005% – 3.0% obs/m (0.0015% – 0.915% obs/ft)
Threshold Setting Range:
Fire Alarm: 0.15%/m – 3%/m (0.046%/ft – 0.915%/ft)
Pre-Alarm: 0.1%/m – 1.5%/m (0.03%/ft – 0.457%/ft)
Alarm and Flow Delays:0 – 60 seconds
Indication:5 LEDs for Pre-alarm, Fire, Fault, Filter and Power
IP rating:IP30
Filtration:Field replaceable and monitored
Flow Monitoring and Reporting:High and Low adjustable
Fan control:2 x fans at fixed speed, supervised
Relays:3 Relays rated 2 A @ 30 VDC (Pre-alarm, Fire, Fault)
PC Connection:USB
General Purpose Input (GPI):Reset, Reset + Disable, Stand-by and External Device (PSU) monitoring
Event Log:1,000 events
Cable termination:Screw terminal blocks (0.2-2.5 sq mm, 30-12 AWG)

Ordering Information

ILQ-100ICAM ILQ Aspirated Smoke Detector
ISP-420Surface Mount Kit
ISP-421Flush Mount Kit
ISP-422Replacement Filter
ISP-422-20Replacement Filter (20 pieces)
ISP-423Pipe Kit (Metric)
ISP-423-USPipe Kit (Imperial)
Download Datasheet