Some of NSC Control Panel Modules are as below:
Analogue or ISDN modem for operating the configuration software via telephone line
■ The modules can be plugged into a slot in the ”Solution F1”
Fire Control Panel. Data speed up to 64,000 bps and they use
the Fire Control Panel battery backup in case of mains failure.
Full Redundant CPU Module
■ Additional plug-in module to achieve a full redundant main board
■ According to EN54 standard necessary if more than 512 detectors
are connected
■ VdS approval G 205 024
ARCNET Interface card
■ To plug into a slot of the FCP main board
■ Connecting to the multi master communications
system with a maximum of 128 panels
■ Can be plugged into the FCP twice to realize a full
redundant network
■ Very high reliability
Technical specifications:
Operating voltage: 24 V DC
Current consumption: 30 mA
ARCNET Interface:
up to 128 nodes
Cable length:
max. 1,200 m
Weight: 0.1 kg
Dimensions:
80 x 48 x 20 mm
NSC Webserver Module
■ Permits the access to NSC Fire Control Panels via the
Internet without special software
■ Use of the www infrastructure à e.g. by means of
Internet Explorer, Firefox, Safari etc.
■ User administration for 30 users
■ Access by user name and password
■ 9 different access authorizations
■ Indicates all messages / status of the FCP
■ Shows the complete event log
■ Online control of the Fire Alarm Panel front facia
■ Complete operation of the FCP Plug-in module
Technical specifications:
Quiescent current: 38 mA (24 V DC)
Linux O / S Software with 2.6.24 kernel
10 / 100 Mbps Ethernet LAN interface
ARM9 CPU 192 MH
32 MB SDRAM, 32 MB NOR Flash
3.3 V / 300 mA
Dimensions: 56 x 56 x 20 mm