FIREwave is a hybrid wireless based family of products which is fully integrated into Hochiki’s renowned ESP intelligent hardwired system.
This seamless hybrid integration provides the user with maximum flexibility in configuring the system to meet the specific needs of the building into which it is to be deployed.
FIREwave employs the latest radio technology. providing a simple and economic hybrid wireless fire detection system installation with minimal disruption to the fabric of the building and its operation.
Flexible and versatile, FIREwave is suited to a wide range of applications.
matching the requirements of any building from busy hotels to sensitive heritage buildings.FIREwave is the most flexible fire detection solution available that is simple to install and maintain.
overcoming installation and maintenance challenges on the most demanding sites.
advanced patented technology is used to achieve optimum performance.
Flexible and versatile, FIREwave is suited to a wide range of applications.
matching the requirements of any building from busy hotels to sensitive heritage buildings.FIREwave is the most flexible fire detection solution available that is simple to install and maintain.
overcoming installation and maintenance challenges on the most demanding sites.
advanced patented technology is used to achieve optimum performance.
DRC2
The monitored input can be used for local power supply fault monitoring or as a general-purpose input. Also available as a DIN Rail mountable version. Both models feature an integral short-circuit isolator.
Specs
Loop Powered
Single Loop Address
Two Independently Controlled Changeover Relays
Relays Contact Rated 30V dc At 1amp
Auxiliary Monitored Input
DIN Rail Version Available
Both Models Feature An Integral Short Circuit Isolator
DSC2
The monitored input can be used for local power supply fault monitoring or as a general-purpose input. Also available as a DIN Rail mountable version. Both models feature an integral short-circuit isolator.
Specs
Single Loop Address
Two Independent Sounder Circuits
Each Circuit Fully Monitored For Open And Short Circuit Faults
Each Alarm Circuit Fused At 1amp
Auxiliary Monitored Input
Outputs Are Synchronised And Can Be Driven Continuousley Or Intermittently
24V dc Auxiliary Power Required
DIN Rail Version Available
Both Models Feature An Integral Short Circuit Isolator
SZM2
SZM2 also available as a DIN Rail mountable version. Both models feature an integral short-Scircuit isolator.
Specs
- Loop Powered
- Up To 6 Conventional Detectors
- Single Loop Address
- Remote LED Output
- Fully Monitored For Short And Open Circuit Faults
- DIN Rail Version Available
- Both Models Feature An Integral Short Circuit Isolator
DIM2
DIM2 also available as a DIN Rail mountable version. Both models feature an integral short-circuit isolator.
Specs
- Loop Powered
- Single Loop Address
- Two Independent Inputs For Monitoring Of Volt Free Contacts
- Each Input Can Be Configured To Monitor Either Normally Open Or Closed Contacts
- DIN Rail Version Available
- Both Models Feature An Integral Short Circuit Isolator
Download Datasheet
With Intelligent (analogue addressable) and Conventional systems available for commercial and industrial applications.
Hochiki also has a range of products for specialised environments. including aspirating (high sensitivity), voice evacuation and hybrid wireless capabilities.
For especially demanding environments, Hochiki can offer industrial, explosion-proof, SIL2 approved and marine products.
which have been designed especially for these challenging applications.
Key Components of HFP
The HFP system provides you with a robust protocol. reliable devices and user friendly panels which collectively create a complete solution for any fire detection requirement .
Hochiki Conventional Detectors
Smoke Detector SLV-E3 HFP:
Removable, High Performance chamber
Remote Indicator output
Wide voltage range (9.5 ~ 30V dc)
Low profile design with one piece outer cover
Twin fire LEDs allow 360 viewing
Range of mounting bases
Approved by LPCB
The SLV-E3(HFP) is a Photoelectric Smoke Detector, which is fully compatible with the majority of
existing Conventional systems.
The SLV-E3(HFP) incorporates Hochiki’s unique High Performance photoelectric smoke chamber
removing the need to use Ionisation Detectors in the majority of applications. This also allows the
Detector threshold level to be increased, thereby improving the signal to noise ratio and reducing
susceptibility to false alarms. An integral third terminal provides a remote indicator output.
The smoke chamber is easily removed or replaced for cleaning and utilises a unique baffle design which
allows smoke to enter the chamber whilst keeping out ambient light.
SLV-E3(HFP)
Download DatasheetHeat Detector DCD-AE3 HFP
Conventional Combined Rate of Rise & Fixed Temperature Heat Detector (60°C)
– Electronic linear heat detection
– Remote Indicator output
– Wide voltage range (9.5 ~ 30Vd.c.), can be installed on security systems
– Twin fire LED’s allow 360° viewing
– Full Range of mounting bases
– Approved by LPCB
Model DCD-AE3(HFP) is a Rate of Rise Heat Detector with a 60°C fixed temperature element using a thermistor and linearising circuit to provide an accurate linear response Heat Detector. The DCD-AE3(HFP) is ideal for use where medium ambient temperatures exist, such as drying rooms or where Smoke Detectors are unsuitable because of the presence of steam or cooking fumes such as in a kitchen. The DCD-AE3(HFP) is supported by a range of bases for different applications and these are supported on the majority of conventional systems. A third terminal provides remote indicator
output.
DCD-AE3(HFP)
Download Datasheet
In the following post you will find all the practical tips for installing ESP Hochiki sensors.
These are intended to provide the SCI functionality of these sensors.
SCI sensors must be installed directly on the YBV-R / 4 base. The following pictures can help make this more transparent.
