Posts

Fireray One

With no specialist tools or knowledge needed for installation and operation, the Fireray One is a standalone beam detector that prioritises ease of installation. Using the Fireray One, it couldn’t be easier to bring the benefits of beam detection to your application:

  • Auto-Aligns – using the integrated user interface – just steer the laser onto the Reflector, then at the flick of a switch, it aligns itself. 8 times faster than previous detectors
  • One person installation – everything can be done by one person
  • One standalone product – no specialist tools required; minimal prior knowledge and training needed

 

Fireray One

Fireray One Key Benefits:

  • Integrated visible laser and auto-alignment for ultimate ease of alignment
  • Integrated user interface
  • Prevent nuisance alarms with Light Cancellation Technology™ which compensates for sunlight and artificial light sources
  • Building Movement Tracking™ continuously maintains alignment when buildings settle or flex due to temperature variations
  • Contamination Compensation to correct for gradual build-up of dust on optics
  • Clean detectors quickly and easily without affecting alignment
  • Low power consumption; can be powered from the loop
  • Prevent interference between beams with Dynamic Beam Phasing; install beams facing each other or in irregular configurations
  • Detection range of up to 120m

Ideal Applications

  • Education and Heritage Establishments
  • Industrial Units and Warehousing
  • Aviation Hangars
  • Glass Atria in Hotels and Retail Complexes
  • Chemical Processing and Storage Facilities

Fireray one with 1 prism 50m PN EN 6010-100 / UL 6010-300
Long Range Kit 3 prisms 120m PN 1010-000

Dowload Brochures

For other beam detectors CLICK HERE.

/by

Fireray® 50R/100R

Fireray beam detector

The Fireray® 50R/100R series of reflective infrared optical beam smoke detectors are comprised of a single unit incorporating an infrared Transmitter and Receiver. The signal is reflected by a prism and analysed for smoke presence. The system is designed to be mounted so that the beam will project between 0.3 and 0.6 metres below and parallel to the ceiling. Lateral detection may be up to 7.5 metres either side of the beam.

Fireray® 50R/100R

Fireray® 50R/100R Key Benefits

  • Single Compact Housing
  • Area coverage 50 metre or 100 metre model available
  • 12-24 Vdc Operation
  • Low current Consumption
  • Robust Construction
  • Conforms to: BS5839 Part 5 and EN54 part 12, UL and VdS

Applications

The Fireray® 50R/100R series of reflective infrared optical beam smoke detectors provide economical and effective protection of large, open plan spaces with high ceilings, particularly if access to ‘point type’ smoke detectors presents practical difficulties.

Download Datasheet

Installation guid

• IMPORTANT NOTE: The infrared beam path MUST be kept clear of obstructions at all times! Failure to comply may result in the system initiating a Fire or Fault signal

• Detector installation must comply with local regulations. UL listed products must comply with NFPA72
• Ensure clear line of sight between Detector and Reflector – it is recommended at least 0.5m radius of clear space be maintained around the centre of the beam path
• Mount securely to solid structural surfaces
• Position beam as high as possible, but with a minimum distance of 0.5m from Detector to ceiling. For installations complying with UL268/NFPA72, the maximum distance of Detector and Reflector from the ceiling must be 10% of the distance between floor and ceiling
• Mount Detector and Reflector directly opposite each other
• Do NOT position Detector where personnel or objects can enter beam path
• Do NOT position two Detectors facing each other
• Do NOT install the Detector or Reflector in environments where condensation or icing are likely to occur
• For ranges between 5m and 50m, use a 50m Detector with 1 Reflector.
• For ranges between 50m and 100m, use a 100m Detector with 4 Reflectors.

for other beam detectors CLICK HERE.

/by