post

تستر دتکتور spectrex

برای ایمن سازی کامل در برابر آتش ، خودآزمایی (Self Test) آشکارساز شعله کافی نیست. طبق گفته اکثر مراجع محلی و طبق درخواست گواهی نامه SIL2 ، شما باید حداقل یک بار در سال یکپارچگی کل سیستم تشخیص شعله خود را آزمایش و از صحت کارکرد آن اطمینان حاصل کنید. این به معنای انجام یک تست Loop کامل سیستم از دتکتور تا سیم کشی به کنترل پنل و تا اطلاع رسانی هشدار ها و زنگ هاست. تنها راه برای انجام این کار ، بدون روشن کردن آتش واقعی ، با یک شبیه ساز شعله خارجی است.تستر دتکتور spectrex در دو نوع زیر معرفی میگردد.

To be fully secure against fire, flame detector self-testing is not enough. According to most local jurisdictional authorities and as required for SIL2 compliance, you need to test and ensure the integrity of your entire flame detection system at least once per year. That means performing a full system loop test from the detector, through the wiring to the controller, and up to the actual alarm notification. The only way to do so, without lighting a real fire, is with an external flame simulator.

تستر نوع fs1200

Complete End-to-End Testing Using our Flame Simulator

The FS-1200 FLAME SIMULATOR is the essential complimentary tool to the self-testing capabilities of your Sharpeye™ UV and UV/IR Flame Detectors. It brings fire prevention safety to a higher level by giving you the ability to fully test the operational readiness of your entire fire detection system: • Test the integrity of all the system components: all alarm outputs, all cabling and connections and the fire alarm panel functionality. • Test clear line of sight: By using the Spectrex Flame Simulator, you will ensure that no object is obstructing the field of view, and that the detector’s window lens is not obscured. Therefore, by simulating a fire that actually triggers the detector outputs, the model FS-1200 verifies the correct operation of the UV and UV/IR flame detector, performs an essential end-to-end loop test and verifies window cleanliness.

Key Benefits تستر دتکتور spectrex

• Long-range flame detector activation – at a range up to 20ft (6m) – a 33% increase compared to previous simulator models.
• Reduced maintenance costs with easy access for testing detectors, in hard to reach places, from floor/deck level without the need for scaffolding or ladders
• Highly portable – for hand held operation by a single operator
• ATEX/IECEx approved for use in Zones 1 and 2 hazardous areas
• Single charge is sufficient to test up to 100 detectors

FS-1200 Flame Simulator at Work

The Spectrex flame simulator emits IR radiation in a unique pattern corresponding to, and recognizable as fire by your SharpEye Flame Detector. This allows the detector to be tested under “real” fire conditions without the associated risks of an open flame.

DS-F-FS-120

 

 

ABOUT SharpEye

The SharpEye range of Optical Flame Detectors includes a wide variety of technologies such as IR3, Multi-IR, UV/IR, all providing reliability, performance and durability. These flame detectors are equipped with a range of output options, ensuring maximum compatibility, and a wide range of approvals to ensure suitability for a variety of industries, from high risk to commercial.

sharpeye-DS-F-FS-1200_

Technical Specifications تستر دتکتور spectrex

The Flame Simulator Kit, Part No. 380114-2 includes the FS-1200 Flame Simulator, battery, charger, tool kit and user guide TM380102 in carrying case

Table-DS-F-FS-1200

تستر نوع fs1100

Complete End-to-End Testing Using our Flame Simulator

The FS-1100 FLAME SIMULATOR is the essential complimentary tool to the self-testing capabilities of your Sharpeye™ IR3 Flame Detectors. It brings fire prevention safety to a higher level by giving you the ability to fully test the operational readiness of your entire fire detection system:
• Test the integrity of all the system components:
all alarm outputs, all cabling and connections and the fire alarm panel functionality.
• Test clear line of sight: By using the Spectrex Flame Simulator, you will ensure that no object is obstructing the field of view, and that the detector’s window lens is not obscured.
Therefore, by simulating a fire that actually triggers the detector outputs, the model FS-1100 verifies the correct operation of the IR3 detector, performs an essential end-to-end loop test and verifies window cleanliness.

Key Benefits تستر دتکتور spectrex

• Long-range flame detector activation – at a range up to 40ft (12m) – a 33% increase compared to previous simulator models.
• Reduced maintenance costs with easy access for testing detectors, in hard to reach places, from floor/deck level without the need for scaffolding or ladders
• Highly portable – for hand held operation by a single operator
• Easy aiming using laser diode
• ATEX/IECEx approved for use in Zones 1 & 2, Zones 21 & 22 hazardous areas
• Single charge is sufficient to test up to 1,000 detectors

FS-1100 Flame Simulator at Work

The Spectrex flame simulator emits IR radiation in a unique pattern corresponding to, and recognizable as fire by your SharpEye Flame Detector.
This allows the detector to be tested under “real” fire conditions without the associated risks of an open flame.

ds-f-fs-1100

ABOUT SharpEye تستر دتکتور spectrex

The SharpEye range of Optical Flame Detectors includes a wide variety of technologies such as IR3, Multi-IR, UV/IR, all providing reliability, performance and durability.
These flame detectors are equipped with a range of output options, ensuring maximum compatibility, and a wide range of approvals to ensure suitability for a variety of industries, from high risk to commercial.

Technical Specifications

table-ds-f-fs-1100

برای کسب اطلاعات بیشتر در مورد تستر دتکتور spectrex به سایت www.spectrex.net مراجعه کنید.