,

Hochiki Interfaces

DRC2

The monitored input can be used for local power supply fault monitoring or as a general-purpose input. Also available as a DIN Rail mountable version. Both models feature an integral short-circuit isolator.

Specs

Loop Powered

Single Loop Address

Two Independently Controlled Changeover Relays

Relays Contact Rated 30V dc At 1amp

Auxiliary Monitored Input

DIN Rail Version Available

Both Models Feature An Integral Short Circuit Isolator

Download datasheet

 

DRC2

DSC2

The monitored input can be used for local power supply fault monitoring or as a general-purpose input. Also available as a DIN Rail mountable version. Both models feature an integral short-circuit isolator.

Specs

Single Loop Address

Two Independent Sounder Circuits

Each Circuit Fully Monitored For Open And Short Circuit Faults

Each Alarm Circuit Fused At 1amp

Auxiliary Monitored Input

Outputs Are Synchronised And Can Be Driven Continuousley Or Intermittently

24V dc Auxiliary Power Required

DIN Rail Version Available

Both Models Feature An Integral Short Circuit Isolator

Download Datasheet

 

CHQ-DSC(SCI)

SZM2

SZM2 also available as a DIN Rail mountable version. Both models feature an integral short-Scircuit isolator.

Specs

  • Loop Powered
  • Up To 6 Conventional Detectors
  • Single Loop Address
  • Remote LED Output
  • Fully Monitored For Short And Open Circuit Faults
  • DIN Rail Version Available
  • Both Models Feature An Integral Short Circuit Isolator
SZM2

Download datasheet

DIM2

DIM2 also available as a DIN Rail mountable version. Both models feature an integral short-circuit isolator.

Specs

  • Loop Powered
  • Single Loop Address
  • Two Independent Inputs For Monitoring Of Volt Free Contacts
  • Each Input Can Be Configured To Monitor Either Normally Open Or Closed Contacts
  • DIN Rail Version Available
  • Both Models Feature An Integral Short Circuit Isolator

 

Download Datasheet

/by
,

Detectors and Control Panels of HFP Protocol

With Intelligent (analogue addressable) and Conventional systems available for commercial and industrial applications.
Hochiki also has a range of products for specialised environments. including aspirating (high sensitivity), voice evacuation and hybrid wireless capabilities.

For especially demanding environments, Hochiki can offer industrial, explosion-proof, SIL2 approved and marine products.
which have been designed especially for these challenging applications.

Key Components of HFP
The HFP system provides you with a robust protocol. reliable devices and user friendly panels which collectively create a complete solution for any fire detection requirement .

HFP

/by
,

Hochiki Conventional Detectors

Hochiki Conventional Detectors

Smoke Detector SLV-E3 HFP:

دتکتور های متعارف HOCHIKI SLV E3 HFP

Removable, High Performance chamber
 Remote Indicator output
 Wide voltage range (9.5 ~ 30V dc)
 Low profile design with one piece outer cover
 Twin fire LEDs allow 360 viewing
 Range of mounting bases
 Approved by LPCB

 

The SLV-E3(HFP) is a Photoelectric Smoke Detector, which is fully compatible with the majority of
existing Conventional systems.
The SLV-E3(HFP) incorporates Hochiki’s unique High Performance photoelectric smoke chamber
removing the need to use Ionisation Detectors in the majority of applications. This also allows the
Detector threshold level to be increased, thereby improving the signal to noise ratio and reducing
susceptibility to false alarms. An integral third terminal provides a remote indicator output.
The smoke chamber is easily removed or replaced for cleaning and utilises a unique baffle design which
allows smoke to enter the chamber whilst keeping out ambient light.

SLV E3 HFP
SLV-E3(HFP)
Download Datasheet

Heat Detector DCD-AE3 HFP

 

دتکتور های متعارف HOCHIKI DCD AE3 HFP
Conventional Combined Rate of Rise & Fixed Temperature Heat Detector (60°C)

– Electronic linear heat detection
– Remote Indicator output
– Wide voltage range (9.5 ~ 30Vd.c.), can be installed on security systems
– Twin fire LED’s allow 360° viewing
– Full Range of mounting bases
– Approved by LPCB

Model DCD-AE3(HFP) is a Rate of Rise Heat Detector with a 60°C fixed temperature element using a thermistor and linearising circuit to provide an accurate linear response Heat Detector. The DCD-AE3(HFP) is ideal for use where medium ambient temperatures exist, such as drying rooms or where Smoke Detectors are unsuitable because of the presence of steam or cooking fumes such as in a kitchen. The DCD-AE3(HFP) is supported by a range of bases for different applications and these are supported on the majority of conventional systems. A third terminal provides remote indicator
output.

DCD AE3 HFP
DCD-AE3(HFP)
Download Datasheet
/by

Installing Hochiki Detectors

In the following post you will find all the practical tips for installing ESP Hochiki sensors.

These are intended to provide the SCI functionality of these sensors.

SCI sensors must be installed directly on the YBV-R / 4 base. The following pictures can help make this more transparent.

نصب سنسور های HOCHIKI
نصب سنسور های HOCHIKI
/by

HOCHIKI Addressable Detectors

HOCHIKI Addressable Sensors

Smoke Detector (ALN-E(HFP :

 Removable, High Performance chamber
 Twin LEDs allow 360 viewing – green when polling, turn red in fire
 Locking mechanism (sensor to base)
 Variable sensitivity
 Electronically addressed
 Pulsing/non-pulsing controlled from panel*  Approved by LPCB & VdS
 SIL Level 2 approved variants available

ALN-E(HFP)
Download Datasheet

Heat Detector ATJ-E(HFP):

 User selectable modes
 Incorporates Fixed Temperature and Rate of Rise Heat elements
 Twin LEDs allow 360 viewing – green when polling, turn red in fire
 Pulsing/non-pulsing controlled from panel
 Electronically addressed
 LPCB & VdS approved to Classes A1, B & C
 SIL Level 2 approved variants available
 Available in white

ATJ-E(HFP)
Download Datasheet

Multi-Detector ACC-E(HFP):

 User selectable modes
 Incorporates Optical & Heat elements
 Removable, High Performance Chamber
 Twin fire LEDs allow 360 viewing
 Pulsing/non-pulsing controlled from panel
 Variable sensitivity
 Electronically Addressed
 Approved by LPCB

ACC-E(HFP)
Download Datasheet
/by

NSC Control Panel Solution F1

NSC Control Panel model which is NSC Solution F1 has all needed approvals such as VDS and is one of the most powerful control panels in the world.

NSC Solution F1 control panel

NSC CONTROL PANEL

  • ■ Graphics LCD module with 240 x 64 dots
    ■ Integral power supply with 4.2 A or alternative 6.7 A
    ■ Steel housing with brand new touch control panel
    ■ Interface for German Fire Brigade Control Panel
    ■ 3 separate power outputs for transmission device / sounders / strobes
    ■ USB interface for configuration by PC
    ■ Up to 8 programmable push buttons
    ■ Redundant RS-485 interface
    ■ 3 x RS-232 interfaces
    ■ 2 monitored conventional zones in NSC Solution F1
    ■ 16 digital outputs, programmable
    ■ 8 digital inputs, monitored for “open-circuit”
    ■ 4 relay change over contacts, programmable
    ■ Earth fault detection
    ■ Event log with max. 10,000 messages

NSC SOLUTION F1

■ 2 to 18 loops are possible in one standard wall-mounted housing. Analogue addressable detectors and conventional detectors can be mixed in one Fire Control Panel.
■ User-friendly housings because of hinged frames which gives easy access for the technician to the wiring terminals.
■ 32 Bit advanced CPU core – supplied as an upgradeable PCB module! This gives the possibility for smart software solutions and the possibility to change the micro processor very easily in the event of a new – higher performed – model in future or if one model become obsolete. In such a case the main board PCB of the “Solution F1” panel need not be exchanged or upgraded.
■ Generous memory space with 8 MB-Flash and 8 MB-RAM to allow convenient programming of links and customer specified texts.
■ Numerous running modes and detection algorithms are programmable at this new panel. In combination with analogue addressable detectors it can be perfectly adapted to every application of the market.

■ Multi protocol loop cards are available, which means that different analogue addressable detectors can be easily connected. These PCBs are able to check the loop for short circuit and wire break and detect a possible earth fault of the shielding.
■ Guaranteed 100 % compatibility to Hochiki ESP protocol as well as to Apollo XP95 / Discovery protocol in NSC Solution F1.
■ Network by ARCNET. This BUS system distinguishes by multi master ability which leads to a continuously running network even if the master node fails.
■ 8 programmable push buttons allow a user-friendly handling of certain user defined operations.
■ Auto dynamic operating mode by the graphics display with assigned functional push buttons.
■ The texts on front fascia are easy to change for international versions of the “Solution F1”.

 

/by

NSC Control Panel Modules

Some of NSC Control Panel Modules are as below:

nsc ISDN modem

Analogue or ISDN modem for operating the configuration software via telephone line

■ The modules can be plugged into a slot in the ”Solution F1”
Fire Control Panel. Data speed up to 64,000 bps and they use
the Fire Control Panel battery backup in case of mains failure.

nsc cpu

Full Redundant CPU Module
■ Additional plug-in module to achieve a full redundant main board
■ According to EN54 standard necessary if more than 512 detectors
are connected
■ VdS approval G 205 024

nsc arcnet interface card

ARCNET Interface card
■ To plug into a slot of the FCP main board
■ Connecting to the multi master communications
system with a maximum of 128 panels
■ Can be plugged into the FCP twice to realize a full
redundant network
■ Very high reliability
Technical specifications:
Operating voltage: 24 V DC
Current consumption: 30 mA
ARCNET Interface:
up to 128 nodes
Cable length:
max. 1,200 m
Weight: 0.1 kg
Dimensions:
80 x 48 x 20 mm

NSC Webserver Module
■ Permits the access to NSC Fire Control Panels via the
Internet without special software
■ Use of the www infrastructure à e.g. by means of
Internet Explorer, Firefox, Safari etc.
■ User administration for 30 users
■ Access by user name and password
■ 9 different access authorizations
■ Indicates all messages / status of the FCP
■ Shows the complete event log
■ Online control of the Fire Alarm Panel front facia
■ Complete operation of the FCP Plug-in module
Technical specifications:
Quiescent current: 38 mA (24 V DC)
Linux O / S Software with 2.6.24 kernel
10 / 100 Mbps Ethernet LAN interface
ARM9 CPU 192 MH
32 MB SDRAM, 32 MB NOR Flash
3.3 V / 300 mA
Dimensions: 56 x 56 x 20 mm

/by

NSC Control Panel Cards

NSC Solution F1 Control Panel Cards are as below:

Loop Cards :

nsc loop card کارت لوپ

Loop card for “Solution F1” with 2 loops / 4 stub lines
■ 2 loops – each maximum 254 detectors / modules (Apollo: 2 x 126) –
or alternative 4 stub lines
■ cable length max. 3,500 m (2 x 2 x 0.8)
■ 8 user programmable open collector outputs
■ up to 127 loop sounders per loop can be activated at the same time
■ cable shielding monitored for open and short circuit
■ Earth fault detection

2. (Redundant Loop Cards)

nsc redundant loop card

Redundant Loop card for “Solution F1”
with 2 loops / 8 stub lines
■ As Loop card for “Solution F1” with 2 loops / 8 stub lines but
additionally with 100 % redundancy. This means the micro processor, the
RAM and the operating system memory are doubled on this card.
So there will be no failure in case of micro processor fault.

3. Conventional Cards

nsc conventional card کارت متعارف

Conventional detector card for 8 stub lines
■ compatible to almost all conventional detectors on the market
■ 32 detectors per line according German standards
■ 8 programmable open collector alarm outputs
■ Earth fault detection
■ Failure mode in case of micro-processor fault

4. (Redundant Conventional Cards)

nsc redundant conventional card

Conventional detector card with 100%
redundancy for 8 stub lines
■ as Conventional detector card for 8 stub lines but with 100 %.
That means the micro processor, the Ram and the operating system
memory are doubled on this card. So there will be no failure in case of
micro processor fault.

5. Relay Card

nsc relay card کارت رله ان اس سی

Relay card with 8 change over contacts
■ compatible to F1 fire detection system but usable as a universal
device in other systems too
■ 8 programmable change over contacts, each 250 V AC / 5 A

Download NSC Catalog 

/by
,

NSC Solution F1 Software Download

Download NSC  Solution F1 control panel Softwareدانلود نرم افزار کنترل پنل NSC

NSC Fire Alarm Control Panel Solution F1

The “Solution F1“ fire control panel range is a new generation, modular and ultra modern fire control panels. These have been developed to meet international standards and to satisfy specific international requirements at the highest level.

  • Modular, intelligent hybrid fire control panel range
  • Supports Hochiki ESP and Apollo XP95 / Discovery detectors
  • 2 – 18 loops in one standard housing
  • Brand new touch control panel
  • Graphics LCD module 240 x 64 as standard included on basic model
  • Integral Power supply 24 V DC with max. 6.7 A or 4.2 A as standard included
  • 32 bit high performance CPU
  • Flash memory up to 8 MB and RAM memory up to 8 MB
  • Many powerful features included
  • NSC Control Panel Configuration software operated via modem or USB interface
  • Full redundant main board and full redundant loop cards as options

  • To get a Download Link, Please Contact Us

/by