,

Spectrex Flame Detectors 40/40 series

Spectrex Flame Detectors 40/40 series

دتکتور شعله Spectrex سری 40/40

The UV/IR flame detector senses radiant energy in the short wave section of both the ultraviolet and infrared portions of the electromagnetic spectrum. The signals from both sensors are analyzed for frequency, intensity and duration. Simultaneous detection of radiant energy in both the UV and IR sensors triggers an alarm signal. The UV sensor incorporates a special logic circuit that helps prevent false alarms caused by solar radiation. Due to increased reliability, the 40/40 Series warranty period has been extended to 5 years and is SIL2 (TUV) approved to IEC 61508.

FEATURES & BENEFITS

• UV/IR Dual-Sensor
• Solar blind
• Automatic Built-In-Test (BIT) and Manual – to assure continued reliable operation (in 40/40LB only) • Heated window – for operation in harsh weather conditions (snow, ice, condensation)
• Multiple output options for maximum flexibility and compatibility
– Relays (3) for Alarm, Fault and Auxiliary
– 0-20mA (stepped)
– HART Protocol for maintenance and asset management
– RS-485, Modbus Compatible

• High Reliability – MTBF – minimum 150,000 hours
• Approved to Safety Integrity Level 2 (SIL2 – TUV)
model 40/40LB only
• 5-Year Warranty
• User Programmable via HART or RS-485
• Hazardous area zones:
– Zones 1 & 2 with IIC gas group vapors present
– Zones 21 & 22 with IIIC dust type present

• Ex approved to:
– ATEX & IECEx
– FM/FMC/CSA

• 3rd party performance approved
– EN54-10 (VdS)
– FM3260
• Marine Approval
– MED ‘Wheelmark’ approval (DNV)

APPLICATIONS (model dependent)

Offshore Oil & Gas
installations
Onshore Oil & Gas installations and pipelines
Chemical plants
Petrochemicals plants
Storage Tank farms
Aircraft hangars
Power Generation facilities
Pharmaceutical Industry
Printing Industry
Warehouses
Automotive Industry
Explosives & Munitions
Waste Disposal facilities
Aerospace Industry
Paint, Polymer and Glue

دتکتور شعله Spectrex سری 40/40 table

/by
,

Vesda Airsampling Units Filters

Vesda Air Sampling Devices Filters are:

Internal or Inline

———————————————————-

1. Internal Filters

The VESDA replacement filter cartridge (VSP-005 for single units and VSP025 for a pack of 20) is used to replace filter cartridges in VESDA VLC, VLF, VLP and VLS detectors.

فیلتر های دتکتور های مکشی Vesda

Features

• Easy swap replacement filter
• Fits VLC, VLF, VLP and VLS VESDA detectors
• Available singly or in packs of 20
• Two Stage Filtration
– First stage removes particles in excess of 20 microns
– Second stage is ultra-fine and removes more than 99% of particles of 0.3 microns or larger  to provide a clean air barrier for optics protection.

Dimensions
90 mm x 63 mm x 30 mm (3.5 in. x 2.5 in. x 1.2 in.)

Ordering Information

VSP-005                     Single cartridge
VSP-025                     Pack of 20 cartridges

2. inline Filters

Introduction

The Xtralis In-Line Filter provides Xtralis customers the ability to address a wide array of harsh environments with high levels of airborne contaminants in a simple and cost-effective manner.

Description

Unlike other in-line fi ltration solutions available on the market, the Xtralis In-Line Filter provides superior performance in terms of improving detector longevity and reducing maintenance frequency. Having tapered inlet and outlet means the Xtralis In-Line Filter is easily fi tted in line with the sampling pipe without the need for any additional pipe fi ttings hence reducing the cost of installation. Filter elements can be easily replaced without having to remove the fi lter from the pipe network hence simplifying maintenance. Its elegant design blends in seamlessly into the installation where up to four can be installed side-by-side on Xtralis multi-pipe installations.

How it works

The arrows on the Xtralis In-Line Filter cover indicate the direction of airfl ow aiding ease of correct mounting. As the airfl ow enters the fi lter housing it impinges on the fi lter elements which are positioned at a certain angle within the fi lter housing. This arrangement maximizes the fi lter element surface area subjected to the airfl ow hence promoting a longer fi lter life.

Features

• Suitable for all Xtralis Aspirating Smoke Detectors
• Improved detector longevity in applications with high levels of air-borne contamination
• Reduces maintenance intervals, thus reducing total cost of ownership
• Requires no additional pipe fi ttings thus reducing cost of installation
• Improved aesthetics
• Vertical or horizontal mounting
• Compatible with metric (25mm OD) and imperial (1” OD) pipes eliminating the need for pipe adaptors

Dimensions

 

vesda inline filter

Ordering Information

• VSP-850-G: Xtralis In-Line Filter (Grey)
• VSP-850-R: Xtralis In-Line Filter (Red)
• VSP-850-M: Xtralis In-Line Filter (Metal)
• VSP-855-4: Xtralis In-Line Filter Elements 4 pack
• VSP-855-20: Xtralis In-Line Filter Elements 20 pack

Download Datasheet

/by
,

Vesda VLC-500

دکتور مکشی مدل Vesda VLC-500

The VESDA VLC by Xtralis is an aspirating smoke detector that provides very early warning in single and small environments where space is at a premium. The VESDA VLC aspirating smoke detector is available in two versions, one that interfaces via relays only (RO) and one that interfaces via relays and VESDAnet (VN). The VESDA VLC-EX detector has been specifically
designed to provide all the benefits of ASD for the protection of hazardous applications with Zone 2 classification.

:APPLICATIONS

:The Xtralis VESDA VLC offers a simple, cost-effective solution for the protection of single and smaller environments such as
Small archives*
Production machinery*
Ceiling voids*
Prison cells*
Wet benches*
Data storage cabinets*
Critical process tools*

:CERTIFICATIONS

    • UL*
    • ULC*
    • FM*
    • LPCB*
    • VdS*
    • CCC*
    • ActivFire*
    • NF*
    • VNIIPO*
    • CE*
    • CSFM*
    • EN 54-20*
      (Class A (30 holes / 0.05% obs/m*
      (Class B (36 holes / 0.09% obs/m*
      (Class C (40 holes / 0.165% obs/m*
    • FM Hazardous Locations: Suitable for Class 1, Division 2, Groups A, B, C and D*
    • (IECEx (VLC-EX only*
    • (ATX (VLC-EX only*

 

to download Vesda VLC-500 Cllick Here

/by
,

Vesda Air Sampling Detector VLF-250

The VESDA VLF-250 detector is a very early warning smoke detector designed to protect small, business-critical environments of less than 250 m2 (2,690 sq. ft.). The detector works by continually drawing air into sampling holes in a pipe network. The air is filtered and passed into a detection chamber where light scattering technology detects the presence of very small amounts of smoke. Detector status information is communicated on the detector display and via relays or optional interface cards.

دتکتور مکشی مدل Vesda VLF-250The VESDA VLF by Xtralis is an aspirating smoke detector ideal for small, business-critical spaces. Available in two models, the VLF-250 covers up to 250 m2 (2,690 sq. ft.), and the VLF-500 covers areas up to 500 m2

:Applications

:The Xtralis VESDA VLF is a cost-effective solution for areas such as
Local telecommunication exchanges*
Air handling units*
Smaller server rooms*
Correctional facilities*
Control rooms*
Utility control hubs*
Switch rooms*
Railway signal hubs*
Storage facilities*
Cabinets*
Hazardous areas *
Substations*

    • :CERTIFICATIONS
    • UL*
    • ULC*
    • FM*
    • CFE*
    • LPCB*
    • VdS*
    • VNIIPO*
    • AFNOR*
    • ActivFire*
    • CE – EMC and CPD*
    • CSFM*
    • FM Hazardous Locations: Suitable for Class 1, Division 2, Groups A, B, C and D*
    • EN 54-20 (VLF-250)*
      Class A (12 holes / 0.12% obs/m)*
      Class B (12 holes / 0.35% obs/m)*
      Class C (12 holes / 0.80% obs/m)*
    • EN 54-20 (VLF-500)*
      Class A (30 holes / 0.05% obs/m)Class B (30 holes / 0.15% obs/m)
      Class C (30 holes / 0.32% obs/m)

 

/by
,

Firewave Wireless Fire Alarm System

FIREwave is a hybrid wireless based family of products which is fully integrated into Hochiki’s renowned ESP intelligent hardwired system.

This seamless hybrid integration provides the user with maximum flexibility in configuring the system to meet the specific needs of the building into which it is to be deployed.

FIREwave employs the latest radio technology. providing a simple and economic hybrid wireless fire detection system installation with minimal disruption to the fabric of the building and its operation.
Flexible and versatile, FIREwave is suited to a wide range of applications.
matching the requirements of any building from busy hotels to sensitive heritage buildings.FIREwave is the most flexible fire detection solution available that is simple to install and maintain.
overcoming installation and maintenance challenges on the most demanding sites.
advanced patented technology is used to achieve optimum performance.
Main Benefits of the FIREwave Range
firewave range
/by
,

inteligent building management with WinGuard

Comprehensive and unified control of security, building technology and communication systems installed in a property, initiation of the correct actions in case of emergency and receipt of concrete instructions for the optimal solution of the situation: quite simple with WinGuard PSIM from Advancis.

WinGuard NSC

WinGuard is an open architecture command & control platform to integrate and unify security, building automation and communication systems, e.g. fire alarm or intruder detection systems, access control or CCTV. Proprietary interfaces enable transfer of event messages as well as comprehensive control of all linked systems. All system states are collectively displayed in only one user interface. The user profits from a uniform and intuitive operation of a wide variety of different systems. In addition, WinGuard offers program-guided instructions for event processing – for a quick and secure management of the situation.
هوشمند سازی ساختمان با WinGuard NSC

WinGuard has an open system structure. From a single-user system to a comprehensive network solution, a WinGuard installation can be extended step by step with workstations, interface and function modules and therefore flexibly adapts to various tasks.

Using WinGuard as centralized management system reduces purchasing and maintenance costs for other control units as well as training costs. The modular extensibility of WinGuard offers high investment protection. Due to individually adapted modules for particular functions, systems, workflows or verticals, WinGuard also responds to specific requirements.

The advantages at a glance:

  • Standalone- or Network Systems (Client / Server)
  • Upgrade / Update Possibilities
  • Data points depending on Project (expandable in steps of 100 or 1000 Datapoints)
  • more than 200 different interfaces available, optimal for NSC Fire Control Panels
  • Easy and Reliable Data import from the NSC FCP Tool
  • Dual-Screen-Operation available as an option
  • User specific designed surface
  • predefined Users
  • integrated graphics editor to import wmf, bmp and jpg files (Import of CAD files as an option)
  • separated log file for each interface
  • Event handling included
  • Mobile App for smartphones and tablet PCs
  • Optical and acoustic alerts
  • Possibilities for redundancy

As a qualified WinGuard partner, we take care of planning, project planning, software setup, hardware installation and offer qualified services, support and training.

/by
,

NSC Firefighting Control Panel

Single zone extinguishing control unit with the FCP Solution F2

The VdS approved fire control panel “Solution F2”, which has successfully established itself within several years on the market can now be used as an extinguishing control system for single areas.

Additionally to the known features:

 NSC Firefighting Control Panel features:

  • 1–2 loops, optional for addressable components by manufacturers either Apollo or Hochiki.
  • Power supply 230 VAC/24 VDC with 3.5 A.
  • Control panel with membrane keyboard and graphic display.
  • USB- and RS-232 interface.
  • Numerous In/Outputs.
  • Connectability for fire brigade periphery.
  • RS-485 interface card.
  • Single indication of detector groups.

The control panel is now capable to combine the standard FCP with an integrated electronic control device for fire extinguishing systems according to EN 12094-1.For this purpose, there is a new control board having a multiplicity of in- and outputs.

Multiple zone extinguishing control unit with the FCP Solution F1

Exactly the same control board, as for the single zone extinguishing control panel ”Solution F2”, can be mounted in the “Solution F1” to operate multiple extinguishing zones. nPer each extinguishing zone there is one display board with optional key switch for the essential display and eventually required operating functions.

Imen Aria Harigh company, has NSC distributor, so is able to provide installation and user training with these control panels.

for more informatuon about NSC control panel:

/by
,

NSC Company Agent in Iran

Imen Aria Harigh is NSC Agent in Iran.

As the Agent of NSC control panels, in addition to supplying standard NSC addressable devices, the company is able for:

*Designing

*Installation

*Setting up

* Training in all types of fire alarm and fire alarm systems.

نمایندگی NSC

The “Solution F1-6“ panel has as standard a 24 V DC power supply with max. current of 4.2 A.

The user can connect up to 6 loops – each with 254 loop devices (127 detectors/modules plus 127 loop sounder) –

to this panel and can organize a max. of 512 zones.

There are three standard housings which should be chosen depending on battery backup requirements.

The bigger model “Solution F1-18” has a 24 V DC power supply with max. current of 6.7 A fitted as standard.

This panel can control 18 loops as its maximum

/by