The Apollo Test Set SA7800-870APO is a portable test unit featuring a touch screen display capable of providing several functions in interrogating and controlling all devices connected to the unit, either individual devices or compete circuits of analogue addressable devices in the Apollo ranges (CoreProtocol, Discovery and XP95).
Operation
The standard view allows devices to be scanned and controlled through the manipulation of the devices output bits. Devices can also be self-tested using the test set and the different functionality modes can also be controlled. The unit may be powered from an AC mains charger unit or from its own internal batteries. The loop or individual address can be connected to the unit using loop connection ports which are located on the top of the device. The device also has the functionality to test the diagnostics and integrity of the loop to find earth faults etc. The device offers fault finding capabilities which allows for time spent on site to be cut down during the commissioning stage of the system installation. The result of this is time reduced on site for the end user which reduces the overall costs of installing Apollo systems.
Key Features
Loop connection ports for individual addressing or fault finding Enables loop integrity and diagnostics testing during commissioning and maintenance View device information and control functionality modes Internal battery for portability. Can be charged with supplied mains charger Touch screen display Works with XP95, Discovery and CoreProtocol ranges.
https://imenariaharigh.com/wp-content/uploads/2020/05/e0004454_0001.png399600imenariaharighhttps://imenariaharigh.com/wp-content/uploads/2021/09/logo.pngimenariaharigh2020-05-26 00:16:492020-05-26 00:16:49Apollo Test Set
Rotarex offers all the components needed to configure a complete system
for 200/300 bar inert gas extinguishing agent.
– Components entirely compatible and interchangable
– Easier and faster installation – No “bad surprises”
– System pre-tested and qualified
– Everything to the same high-specification
– Greater confidence in performance at the critical time
– Full warranty protection
– Simplicity of a single supplier
https://imenariaharigh.com/wp-content/uploads/2020/05/IG.jpg425500imenariaharighhttps://imenariaharigh.com/wp-content/uploads/2021/09/logo.pngimenariaharigh2020-05-18 17:14:262020-05-18 17:14:26IG Fire Fighting System
Kentec Syncro AS is an analogue addressable fire control panel, available in either one or two detection loops. It combines compact and practical styling with the programming power and connectivity normally associated with much larger systems. With its ease of use and simplicity to install, Syncro AS is straightforward to understand for installers, commissioning engineers and end users alike. Using the latest microprocessor, it provides a flexible control system with high reliability and integrity.
Being a multi-protocol panel, enabling choice to our customers, Syncro AS supports Apollo, Argus Vega and Hochiki detection, making it ideal for small and medium sites that require advanced fire sensing and evacuation options. It can thought be expanded and networked to become part of much larger systems if the need arises, therefore providing a future proof solution for any size of installation. Syncro AS is also available as a Lite version offering a cost-effective solution for smaller standalone installations requiring only one detection loop.
https://imenariaharigh.com/wp-content/uploads/2020/04/syncro-as-500x500-2.jpg425500imenariaharighhttps://imenariaharigh.com/wp-content/uploads/2021/09/logo.pngimenariaharigh2020-04-22 23:39:012020-04-22 23:39:01Kentec Syncro AS 2 Loop Fire Alarm Control Panel
ATEX Gas Detector certified II 3G Ex nA II T6 (Atex Zone 2), aluminium alloy or stainless steel housing, protection rate IP65.With display.
Available outputs: 4-20mA or relays, RS485.
Gas detectors DUST/AD and DUST/DY are rugged and intelligent gas transmitter for a variety of Explosive and Toxic gases.
Main Characteristic:
– Microprocessor based
– 4-20 mA output
– Three Voltage free relay contacts output
– RS-485 MODBUS RTU serial interface or protocol for remote control and maintenance operations.
– LCD Display 8×2 characters
– Non Intrusive “One Person” calibration procedure
– Fully programmable
– Small size
– Low Power consumption
ATEX Gas Detector certified II 2 G Ex d IIC T6, aluminium alloy or stainless steel housing, protection rate IP65. With display.
Available outputs: 4-20mA or relays, RS485.
RAS/AD and RAS/DY are rugged, intelligent gas detectors for a wide
variety of Explosive and Toxic gases.
Main Characteristics:
– Microprocessor based
– 4-20 mA output and/or
– Three Voltage free relay contacts output
– RS-485 MODBUS RTU serial interface or protocol for remote control maintenance
– LCD Display 8×2 characters
– Non Intrusive “One Person” calibration procedure
– Fully programmable
– Small size and Low Power consumption
– Certificate ATEX II 2G Ex d IIC T6
Kentec Sigma K11031M2XT 3 Zone Single Area Extinguishant Control Panel to BS EN12094-1
Designed and manufactured to the highest standards in a quality controlled environment and with European EN12094-1 approvals, the Sigma XT K11031M2 extinguishant releasing panel offers outstanding value and performance for all small to medium fixed fire-fighting installations. With three detection zones as standard, extinguishant release can be configured to activate from any combination of detection zone inputs to allow (among other combinations) any two from three type activations such as would be required for detection in ceiling void, room and floor void applications.
The extensive configuration options of the Sigma XT K11031M2 allow the functionality of the system to be extensively modified while still complying with the requirements of the controlling standard for the equipment (EN12094-1, EN54-2 and EN54-4). The panel contains a large LED display to enable easy configuration and control which also displays the time remaining until extinguishant release for added user safety. The countdown timer is duplicated on up to seven remote status units to provide local indication of the extinguishant system status. With all of the electronics mounted on a single, easily removable, steel plate Sigma XT panels are both robust and easy to install. Sigma XT is supplied in an enclosure that matches the design and colour of the Sigma CP range.
Key Features:
Approved to EN12094-1, EN54-2 and EN54-4
Three detection zones as standard
Any single zone or any combinations of zones can be configured to release
Configurable first stage sounder delays
Configurable detection delays
Zero time delay upon manual release option
Compatible with I.S. barriers
Non-latching zone input option to receive signals from other systems such as aspirating equipment
Configurable extinguishant delays up to 60 seconds in 5 second steps
Configurable extinguishant duration up to 5 minutes in 5 second steps
Countdown timer shows time remaining until release
https://imenariaharigh.com/wp-content/uploads/2020/03/SigmaXT-500x500-1.jpg500500imenariaharighhttps://imenariaharigh.com/wp-content/uploads/2021/09/logo.pngimenariaharigh2020-03-22 16:50:242020-03-22 16:50:24Kentec Sigma XT 3 Zone Single Area Panel
XFP 1 Loop 16 Zone Addressable Fire Panel (XP95/Discovery protocol)
Part No. XFP501E/X
C-TEC’s XFP single loop 16 zone addressable fire alarm panel offers high performance at a very competitive price.
LPCB certified to EN54 parts 2 & 4, it is supplied in an attractive flush or surface mountable plastic enclosure, offers combined keypad or keyswitch entry to Access Levels 2 and 3 and is compatible with Apollo’s XP95/Discovery protocol.
Ideal for use in small stand-alone applications or in larger applications due to its ability to sit on network of up to 8 XFP master panels, it is one of Europe’s best-selling entry-level addressable fire panels.
Packed full of engineering features – some of which are not available on more expensive alternatives (see feature list below) – the XFP501E/X is also fully compatible with C-TEC’s Hush Button fire alarm solution and its new range of EN54 certified addressable sounders and VADs.
XFP 1 Loop 32 Zone Addressable Fire Panel (XP95/Discovery protocol)
Part No. XFP501/X
C-TEC’s XFP single loop 32 zone addressable fire alarm panel offers high performance at a very competitive price.
LPCB certified to EN54 parts 2 & 4, it is supplied in durable metal enclosure, offers combined keypad or keyswitch entry to Access Levels 2 and 3 and is compatible with Apollo’s XP95/Discovery protocol.
Ideal for use in small stand-alone applications or in larger applications due to its ability to sit on network of up to 8 XFP master panels, it is one of Europe’s best-selling addressable fire panels.
Packed full of engineering features – please refer to the feature list below – the XFP501/X is also fully compatible with C-TEC’s Hush Button fire alarm solution and its new range of EN54 certified addressable sounders and VADs.
XFP 2 Loop 32 Zone Addressable Fire Panel (XP95/Discovery protocol)
Part No. XFP502/X
C-TEC’s XFP two loop 32 zone addressable fire alarm panel offers high performance at a very competitive price.
LPCB certified to EN54 parts 2 & 4, it is supplied in durable metal enclosure, offers combined keypad or keyswitch entry to Access Levels 2 and 3 and is compatible with Apollo’s XP95/Discovery protocol.
Ideal for use in small stand-alone applications or in larger applications due to its ability to sit on network of up to 8 XFP master panels, it is one of Europe’s best-selling addressable fire panels.
Packed full of engineering features – please refer to the feature list below – the XFP502/X is also fully compatible with C-TEC’s Hush Button fire alarm solution and its new range of EN54 certified addressable sounders and VADs.
Can be used to repeat the functions of an XFP Main panel at remote parts of a site (e.g. all potential fire service entrances).
Offers all of the functions and controls of an XFP Main panel (access levels 1, 2 and 3).
Includes an on-board fault relay.
Requires its own dedicated Mains power and battery back-up supply.
A maximum of eight XFP Repeaters can be connected to one non-networked XFP Main panel.
Communication between the XFP Main panel and Repeater requires a CFP761 network driver card (fitted as standard in all XFP510-16s, available as an optional extra on Main XFP 16 Zone panels).
Repeater network wired in 1.5 mm2 two-core screened fire resistant cable. Network length must not exceed 500 metres.
https://imenariaharigh.com/wp-content/uploads/2020/02/xfp510.jpg458458imenariaharighhttps://imenariaharigh.com/wp-content/uploads/2021/09/logo.pngimenariaharigh2020-02-11 15:23:122020-11-18 13:24:10C-Tec XFP Fire Alarm Control Panels
A feature-rich touchscreen-controlled addressable fire panel available with 1, 2 or 4 Apollo XP95/Discovery compatible loop drivers (see Key Features section for a full list of ZFP features).
Third-party certified to EN54 parts 2 & 4.
Multiple off-the-shelf variants or build your own panel using our ZFP selection charts.
Rapid loop learn, flexible cause & effects and powerful system diagnostics.
Hi-integrity fault-tolerant RS485 networking option allows up to 128 network nodes (64 main panels and 64 Compact Controllers).
Optional ‘A-Bus’ expansion PCBs, paging and graphic interface facilities.
Intuitive PC programming tools.
Medium and large sized ZFPs also available with 2, 4, 6 or 8 loops.
Certified to EN54-2/4 by the LPCB (0832-CPD-0758).
Protocol/compatibility
Apollo XP95/Discovery.
Mains supply
230V 50/60Hz.
Mains rated current
1.35A maximum.
Internal power supply
27Vdc nominal.
Total output current limited to
5A @ 230Vac (Imax.A 4A; Imin. 12mA).
Battery charge capacity
7Ah min to 18Ah max.
Quiescent current
Varies depending on the panel’s configuration – refer to our ZFP loop/battery calculation tool for details.
Max battery size and type
2 x 12V 18Ah VRLA connected in series.
No. of loop drivers
1, 2 or 4 (dependent on model purchased).
Max. loop output current
500mA (25V min; 34V max).
Max. loop length
1KM.
Max. addressable devices per loop
126.
No. of conventional sounder circuits
2 (Max. length per circuit is 500m).
EOL resistor value
6800Ω 5% Tol. 0/25W (blue, grey, red, gold).
Max. sounder output current
2 x 1A.
Auxiliary relays
2 x Programmable Relays (programmable from C&Es). 1 x Fault Relay (active when no faults are present). Volt free single pole changeover. Max. switch current 1A; Max. switch voltage 30Vdc.
Other outputs
24V Aux. Power (19.5V min, 28V max). Protected by a resettable fuse. Max. current 100mA.
Auxiliary inputs
2 x Programmable Inputs (programmable from C&Es). Connect to 0V to trigger, Max. input voltage 27V (non-latching).
PC connection
Via a galvanically isolated USB socket on the Z41 control module.
Pager/DECT connection
RS232. ESPA compatible.
Graphics interface/diagnostics connection
RS485. Drax compatible.
Network connection
RS485 hi-integrity multi-path fault tolerant network connection via optional ZHN network card. Max 128 network nodes (up to 64 main panels & 64 compact controllers).
Indicators
Full-colour 480 x 272 pixel touchscreen, all relevant EN54 indicators plus 5 programmable indicators. Additional indicators dependent on Switch & Indicator module fitted.
Controls
Interactive touchscreen with menu sensitive buttons; 1 x keyswitch allowing direct access to Access Level 2. Additional controls dependent on Switch & Indicator module fitted.
Connections
Fixed, largest acceptable conductor size 1mm2.
Expansion connections
RS485 peripheral bus connection allows the connection of up to 15 ‘A-Bus’ PCBs (2 control cores plus screen plus 2 cores for power).
User-friendly full colour touchscreen with dynamic buttons and virtual QWERTY keyboard.
Up to 100 separate and programmable zonal LEDs (200 on medium and large sized cabinets).
10,000 programmable and indicatable detection zones.
Up to 38 characters of custom text per loop device.
Automatic daylight saving (BST/GMT) mode.
20,000+ event memory (filterable by fire, fault & date).
Non-fire supervisory event functionality.
Optional thermal printers.
Well-designed cabinets with easily removable electronics chassis.
20-way heavy-duty brass earth bar as standard.
72-hour standby (+ 30 min alarm) in standard cabinets.
Built-in loop status & current-reading.
Powerful engineering and commissioning functions including SafeMode and DeviceManager.
Attractive Compact Controllers.
Wide range of flush-fit bezels and attractive glazed stainless steel frames
FULLY compatible with C-TEC manufactured addressable ancillaries (Hush Buttons, Sounders, Voice Sounders and Beacons)
Powerful and intuitive PC programming tools • Wide range of supported languages
TAKING FIRE ALARM TECHNOLOGY TO A NEW LEVEL
Every once in a while a product comes along that lifts existing, respected technology to another level. C-TEC’s ZFP is one such product.
Created with the input of some of the world’s leading fire alarm and life safety experts, the ZFP is the powerful touchscreen controlled fire alarm panel that everyone’s been waiting for.
Designed and built in the UK, the panel can be configured to suit any application. From small ‘one out, all out’ systems to large multi-loop networked systems with sophisticated cause and effects, the ZFP can handle them all – with ease.
TOUCH AND GO
Everything about the ZFP’s unique full-colour touchscreen interface has been designed with the user in mind.
Simply tap the option you require and away you go. Whether you’re the responsible person on site, the installer, the commissioning engineer or the emergency services, you can access the information you require quickly and easily – all at the touch of a virtual button.
Powerful diagnostics, rapid loop learn, ‘SafeMode’ and a unique ‘DeviceManager’ function combine to make the ZFP one of the most user friendly control panels on the market.
MIX AND MATCH
Mix and match is the name of the game with the ZFP and, with three master cabinets to choose from, you’re spoilt for choice.
Depending on the cabinet you choose, extra indicator and switch modules can be added, along with additional loop driver PCBs, high-integrity network PCBs, ‘A-BUS’ peripheral PCBs, flush mounting bezels, glazed stainless steel frames and more.
With a wide range of ‘off-the-shelf’ ZFPs also available, getting the panel you need for a specific application has never been easier.
CLEVERLY COMPACT
With its classy Compact Controllers, the ZFP not only does the job, it looks the part too.
Worried that your plush new reception area is going to be compromised by an ugly metal box in the main entrance? Think again! The ZFP’s optional state-of-theart
Compact Controllers are stylish, smart and can actually enhance the design of a building’s reception area and access points. Simply locate the main panel out of sight and let the ZFP’s modern high-tech Compact Controllers add a touch of class to your surroundings.
NIFTY NETWORKING
Never before has networking a fire panel been so trouble-free.
Creating a sophisticated fire alarm system for an airport, hospital, university, tower block, hotel, football stadium or other large building is just a few steps up from establishing a simple ‘one out, all out’ system for a small factory unit.
Up to 64 eight-loop panels can be interconnected over the ZFP’s high-integrity fault tolerant network. This versatility, coupled with the ability to assign individual zones across the network and add up to 38 characters of custom text per device means letting the emergency services know the precise location of a fire has never been easier.
“I don’t make fire panels, I install them, but this is the fire panel I would have designedif I was an R&D engineer. The ZFP has virtually every feature you can think of and its touchscreen interface makes installation, commissioning and servicing very easy.” DAVID KEY, PHOENIX FIRE
AND THAT’S NOT ALL!
For specialist installation companies and commissioning engineers, the ZFP has no equal.
Features such as a fully filterable 20,000+ event memory, optional paging facilities, powerful 500mA loop drivers with plug-on connectors, spacious cabinets with a 20-way earth bar, the ability to achieve up to 72 hours standby in a standard cabinet and intuitive PC programming tools combine to make the ZFP a very special fire panel indeed.
All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.
LPCB certified to EN 12094-1 (the European standard for Fixed Firefighting Systems – Components for Gas Extinguishing Systems) and EN54-2/4, the EP203 three zone automatic extinguisher panel epitomises quality, durability and reliability.
Specifically designed for use in areas housing expensive, dangerous or irreplaceable items of equipment, it features an intuitive 128 x 64 pixel display that gives clear and concise feedback to the user, installer and commissioning engineer. It has six monitored inputs (including hold & abort), a time stamped log, adjustable flood times and volt-free changeover relays for fire, local fire, 1st stage active, 2nd stage active, extractor fan and fault.
All of the panel’s electronics – apart from its powerful 3A EN54-4 switch mode PSU – are mounted on a detachable metal bridge plate for ease of installation. A wide range of ancillaries are also available including remote status units, hold-off & abort buttons, line terminators and relay boards.
Certified to EN54-2/4 and EN12094-1 by the Loss Prevention Certification Board (LPCB)
Functions as a standard 3 zone fire panel with additional circuitry for controlling the release of fire-suppressing gas.
128 x 64 pixel display.
Any combination of activated zones can be programmed to automatically start the panel’s extinguishant release sequence.
Manual release button and two keyswitches.
3 conventional sounder circuits (two x 1st stage, one x 2nd stage).
Powerful 3A EN54-4 switch mode PSU.
Wide range of monitored inputs and auxiliary outputs.
Abort and hold inputs.
Time-stamped event log.
RS485 connections for up to 8 flush or surface remote status units with their own LCDs, manual release and mode switches. Single gang economy status units also available.
Wide range of engineering functions.
Optional relay expansion boards and single gang abort & hold buttons
Ideal for use in computer rooms, telecommunication centres, archive storage areas, museums, etc.
3 (two x 1st stage; one x 2nd stage). Max. length per circuit is 50m).
EOL resistor value
6800Ω 5% Tol. 0/25W (blue, grey, red, gold).
Max. sounder output current
3 x 200mA.
Auxiliary relays
Six: (1) Fire; (2) Local Fire; (3) Extract Fan; (4) 1st Stage; (5) 2nd Stage; (6) Fault. Volt free single pole changeover. Max. switch current 1A; Max. switch voltage 30Vdc. Five additional relays available via EP212 relay card.
Other outputs
Extinguishant release (21-28Vdc, rated at 1A for 5 mins). Programmable to delay by 0-60 seconds; to be active for 1-300 seconds and to flood for 60-1800 seconds.
With the growing emphasis on safeguarding property as well as people, the market for automatic fire suppression systems is booming. Comprising a third-party certified three zone automatic extinguisher panel and host of expansion ancillaries, C-TEC’s EP Range has been specifically designed to meet this demand. Ideal for areas housing expensive, dangerous or irreplaceable items of equipment such as computer suites, libraries & art galleries, telecommunication centres, archive storage areas, chemical plants and generator rooms, it includes a wealth of features, many of which are not available on more expensive extinguishing equipment.
Auto Express!
C-TEC’s EP203 three-zone automatic extinguisher panel is LPCB certified to EN12094-1 and EN54-2/4. Featuring an intuitive 128 x 64 pixel graphic display that gives clear and concise feedback to user and installers, it includes six monitored inputs (including hold and abort), a time-stamped event log, adjustable flood times and changeover relays for fire, local fire, 1st stage active, 2nd stage active, extractor fan and fault. Elegantly-styled in a durable enclosure, the EP203 epitomises quality, durability and reliability.
Rock the Status Quo!
Need to cover a room with multiple entrances? Up to eight flush or surface mountable remote status units, each with their own displays, manual release buttons and mode switches, can be connected to the EP203 control panel via a monitored RS485 bus. Cost-effective single gang economy status units are also available. With so much choice, C-TEC’s EP Range is anything but your standard run-of-the-mill automatic extinguisher system.
Stop! Hold! Abort!
The nature and cost of fire suppressing agents means many installers shy away from extingishant systems with one of their biggest concerns the accidental release of the suppressant in a false alarm situation. Have no fear, C-TEC’s IP66 rated Hold and Abort Buttons can be used to delay (hold off) or cancel (abort) the extinguishant release sequence at any time depending on how they are configured. Job done!
Clever combinations!
Whatever type or size of extinguishant system you’re installing, our all-encompassing range of conventional devices can be combined to suit. We stock a huge range of versatile and cost-effective manual call points and sounders & VADs.
Get ActiV
C-TEC’s ActiV fire detectors include a host of features installers love – plenty of working space, two ultra-bright LED indicator strips offering all-round visibility, an ingenious detector/base locking mechanism and compatibility with virtually all known conventional fire alarm panels. Certified to the relevant parts of EN54-5/7, optical, fixed heat, rate-of-rise and multi-sensor variants are available, all manufactured in the UK. It’s no wonder so many installers are switching to ActiV.
Apollo manufactures a comprehensive range of interfaces for systems which enable fire protection solutions to
be engineered simply and e”ectively without the need for custom-designed equipment. These interfaces are available for use on Apollo addressable systems.
The Input / Output Unit provides a voltage-free, double pole changeover (DPCO) relay output, a single monitored switch input and an unmonitored, non-polarised input.
Product code: 55000-852APO
The Sounder Control Unit is used to control the operation of a zone of conventional sounders and report their status to the control panel.
The sounder control unit with isolator allows the device to be operated continuously or be pulsed with 1 second on and 1 second off. The Devices can be operated individually or in groups and whichever address mode has been applied, may be synchronised when in pulsed operation.
The Zone Monitor powers and controls the operation of a zone of up to 20 Apollo Series 65 or Orbis Fire Detectors from a Discovery or XP95 loop. The Zone Monitor with Isolator is loop powered and operates at 17–28V DC with protocol pulses of 5–9V.
Product code:55000-849APO
The Output Unit provides a voltage free single pole, changeover relay output. It is a simplified version of the Input/Output Unit without circuitry for monitoring inputs.
