, ,

تستر دتکتور های فلیم spectrex

تستر دتکتور spectrex

برای ایمن سازی کامل در برابر آتش ، خودآزمایی (Self Test) آشکارساز شعله کافی نیست. طبق گفته اکثر مراجع محلی و طبق درخواست گواهی نامه SIL2 ، شما باید حداقل یک بار در سال یکپارچگی کل سیستم تشخیص شعله خود را آزمایش و از صحت کارکرد آن اطمینان حاصل کنید. این به معنای انجام یک تست Loop کامل سیستم از دتکتور تا سیم کشی به کنترل پنل و تا اطلاع رسانی هشدار ها و زنگ هاست. تنها راه برای انجام این کار ، بدون روشن کردن آتش واقعی ، با یک شبیه ساز شعله خارجی است.تستر دتکتور spectrex در دو نوع زیر معرفی میگردد.

To be fully secure against fire, flame detector self-testing is not enough. According to most local jurisdictional authorities and as required for SIL2 compliance, you need to test and ensure the integrity of your entire flame detection system at least once per year. That means performing a full system loop test from the detector, through the wiring to the controller, and up to the actual alarm notification. The only way to do so, without lighting a real fire, is with an external flame simulator.

تستر نوع fs1200

Complete End-to-End Testing Using our Flame Simulator

The FS-1200 FLAME SIMULATOR is the essential complimentary tool to the self-testing capabilities of your Sharpeye™ UV and UV/IR Flame Detectors. It brings fire prevention safety to a higher level by giving you the ability to fully test the operational readiness of your entire fire detection system: • Test the integrity of all the system components: all alarm outputs, all cabling and connections and the fire alarm panel functionality. • Test clear line of sight: By using the Spectrex Flame Simulator, you will ensure that no object is obstructing the field of view, and that the detector’s window lens is not obscured. Therefore, by simulating a fire that actually triggers the detector outputs, the model FS-1200 verifies the correct operation of the UV and UV/IR flame detector, performs an essential end-to-end loop test and verifies window cleanliness.

Key Benefits تستر دتکتور spectrex

• Long-range flame detector activation – at a range up to 20ft (6m) – a 33% increase compared to previous simulator models.
• Reduced maintenance costs with easy access for testing detectors, in hard to reach places, from floor/deck level without the need for scaffolding or ladders
• Highly portable – for hand held operation by a single operator
• ATEX/IECEx approved for use in Zones 1 and 2 hazardous areas
• Single charge is sufficient to test up to 100 detectors

FS-1200 Flame Simulator at Work

The Spectrex flame simulator emits IR radiation in a unique pattern corresponding to, and recognizable as fire by your SharpEye Flame Detector. This allows the detector to be tested under “real” fire conditions without the associated risks of an open flame.

DS-F-FS-120

 

 

ABOUT SharpEye

The SharpEye range of Optical Flame Detectors includes a wide variety of technologies such as IR3, Multi-IR, UV/IR, all providing reliability, performance and durability. These flame detectors are equipped with a range of output options, ensuring maximum compatibility, and a wide range of approvals to ensure suitability for a variety of industries, from high risk to commercial.

sharpeye-DS-F-FS-1200_

Technical Specifications تستر دتکتور spectrex

The Flame Simulator Kit, Part No. 380114-2 includes the FS-1200 Flame Simulator, battery, charger, tool kit and user guide TM380102 in carrying case

Table-DS-F-FS-1200

تستر نوع fs1100

Complete End-to-End Testing Using our Flame Simulator

The FS-1100 FLAME SIMULATOR is the essential complimentary tool to the self-testing capabilities of your Sharpeye™ IR3 Flame Detectors. It brings fire prevention safety to a higher level by giving you the ability to fully test the operational readiness of your entire fire detection system:
• Test the integrity of all the system components:
all alarm outputs, all cabling and connections and the fire alarm panel functionality.
• Test clear line of sight: By using the Spectrex Flame Simulator, you will ensure that no object is obstructing the field of view, and that the detector’s window lens is not obscured.
Therefore, by simulating a fire that actually triggers the detector outputs, the model FS-1100 verifies the correct operation of the IR3 detector, performs an essential end-to-end loop test and verifies window cleanliness.

Key Benefits تستر دتکتور spectrex

• Long-range flame detector activation – at a range up to 40ft (12m) – a 33% increase compared to previous simulator models.
• Reduced maintenance costs with easy access for testing detectors, in hard to reach places, from floor/deck level without the need for scaffolding or ladders
• Highly portable – for hand held operation by a single operator
• Easy aiming using laser diode
• ATEX/IECEx approved for use in Zones 1 & 2, Zones 21 & 22 hazardous areas
• Single charge is sufficient to test up to 1,000 detectors

FS-1100 Flame Simulator at Work

The Spectrex flame simulator emits IR radiation in a unique pattern corresponding to, and recognizable as fire by your SharpEye Flame Detector.
This allows the detector to be tested under “real” fire conditions without the associated risks of an open flame.

ds-f-fs-1100

ABOUT SharpEye تستر دتکتور spectrex

The SharpEye range of Optical Flame Detectors includes a wide variety of technologies such as IR3, Multi-IR, UV/IR, all providing reliability, performance and durability.
These flame detectors are equipped with a range of output options, ensuring maximum compatibility, and a wide range of approvals to ensure suitability for a variety of industries, from high risk to commercial.

Technical Specifications

table-ds-f-fs-1100

برای کسب اطلاعات بیشتر در مورد تستر دتکتور spectrex به سایت www.spectrex.net مراجعه کنید.

/توسط
, ,

دتکتور شعله Spectrex سری 40/40

دتکتور شعله Spectrex سری 40/40 (یا LB با Built-in-test option) ترکیبی از سنسورهای UV و IR را فراهم می کند، که  سنسور IR آن دارای  طول موج 2.5-3.0 میکرومتر می باشد و می تواند آتش سوزی هایی که پایه ی هیدروکربن، هیدروکسیل و هیدروژن دارند  و همچنین آتش سوزی های فلزی و غیر آلی را تشخیص دهد.

دتکتور شعله Spectrex سری 40/40

The UV/IR flame detector senses radiant energy in the short wave section of both the ultraviolet and infrared portions of the electromagnetic spectrum. The signals from both sensors are analyzed for frequency, intensity and duration. Simultaneous detection of radiant energy in both the UV and IR sensors triggers an alarm signal. The UV sensor incorporates a special logic circuit that helps prevent false alarms caused by solar radiation. Due to increased reliability, the 40/40 Series warranty period has been extended to 5 years and is SIL2 (TUV) approved to IEC 61508.

FEATURES & BENEFITS

• UV/IR Dual-Sensor
• Solar blind
• Automatic Built-In-Test (BIT) and Manual – to assure continued reliable operation (in 40/40LB only) • Heated window – for operation in harsh weather conditions (snow, ice, condensation)
• Multiple output options for maximum flexibility and compatibility
– Relays (3) for Alarm, Fault and Auxiliary
– 0-20mA (stepped)
– HART Protocol for maintenance and asset management
– RS-485, Modbus Compatible

• High Reliability – MTBF – minimum 150,000 hours
• Approved to Safety Integrity Level 2 (SIL2 – TUV)
model 40/40LB only
• 5-Year Warranty
• User Programmable via HART or RS-485
• Hazardous area zones:
– Zones 1 & 2 with IIC gas group vapors present
– Zones 21 & 22 with IIIC dust type present

• Ex approved to:
– ATEX & IECEx
– FM/FMC/CSA

• 3rd party performance approved
– EN54-10 (VdS)
– FM3260
• Marine Approval
– MED ‘Wheelmark’ approval (DNV)

APPLICATIONS (model dependent)

Offshore Oil & Gas
installations
Onshore Oil & Gas installations and pipelines
Chemical plants
Petrochemicals plants
Storage Tank farms
Aircraft hangars
Power Generation facilities
Pharmaceutical Industry
Printing Industry
Warehouses
Automotive Industry
Explosives & Munitions
Waste Disposal facilities
Aerospace Industry
Paint, Polymer and Glue

دتکتور شعله Spectrex سری 40/40 table

/توسط
vesda filters
, ,

فیلتر های دتکتور های مکشی Vesda

فیلتر های دتکتور های مکشی Vesda  شامل دسته های زیر می باشد:

فیلتر های دتکتور های مکشی داخلی Vesda

فیلتر های دتکتور های مکشی خطی Vesda(inline )

———————————————————————————-

1. فیلتر های دتکتور های مکشی داخلی Vesda

The VESDA replacement filter cartridge (VSP-005 for single units and VSP025 for a pack of 20) is used to replace filter cartridges in VESDA VLC, VLF, VLP and VLS detectors.

فیلتر های دتکتور های مکشی Vesda

Features

• Easy swap replacement filter
• Fits VLC, VLF, VLP and VLS VESDA detectors
• Available singly or in packs of 20
• Two Stage Filtration
– First stage removes particles in excess of 20 microns
– Second stage is ultra-fine and removes more than 99% of particles of 0.3 microns or larger  to provide a clean air barrier for optics protection.

Dimensions
90 mm x 63 mm x 30 mm (3.5 in. x 2.5 in. x 1.2 in.)

Ordering Information

VSP-005                     Single cartridge
VSP-025                     Pack of 20 cartridges

2. فیلتر های دتکتور های مکشی خطی (inline)

Introduction

The Xtralis In-Line Filter provides Xtralis customers the ability to address a wide array of harsh environments with high levels of airborne contaminants in a simple and cost-effective manner.

Description

Unlike other in-line fi ltration solutions available on the market, the Xtralis In-Line Filter provides superior performance in terms of improving detector longevity and reducing maintenance frequency. Having tapered inlet and outlet means the Xtralis In-Line Filter is easily fi tted in line with the sampling pipe without the need for any additional pipe fi ttings hence reducing the cost of installation. Filter elements can be easily replaced without having to remove the fi lter from the pipe network hence simplifying maintenance. Its elegant design blends in seamlessly into the installation where up to four can be installed side-by-side on Xtralis multi-pipe installations.

How it works

The arrows on the Xtralis In-Line Filter cover indicate the direction of airfl ow aiding ease of correct mounting. As the airfl ow enters the fi lter housing it impinges on the fi lter elements which are positioned at a certain angle within the fi lter housing. This arrangement maximizes the fi lter element surface area subjected to the airfl ow hence promoting a longer fi lter life.

Features

• Suitable for all Xtralis Aspirating Smoke Detectors
• Improved detector longevity in applications with high levels of air-borne contamination
• Reduces maintenance intervals, thus reducing total cost of ownership
• Requires no additional pipe fi ttings thus reducing cost of installation
• Improved aesthetics
• Vertical or horizontal mounting
• Compatible with metric (25mm OD) and imperial (1” OD) pipes eliminating the need for pipe adaptors

Dimensions

 

vesda inline filter

Ordering Information

• VSP-850-G: Xtralis In-Line Filter (Grey)
• VSP-850-R: Xtralis In-Line Filter (Red)
• VSP-850-M: Xtralis In-Line Filter (Metal)
• VSP-855-4: Xtralis In-Line Filter Elements 4 pack
• VSP-855-20: Xtralis In-Line Filter Elements 20 pack

دانلود دیتاشیت

/توسط
Vesda
, ,

دکتور مکشی مدل Vesda VLC-500

دکتور مکشی مدل Vesda VLC-500  از طریق مکش مداوم هوا به داخل شبکه لوله ای کارایی بالا را به ارمغان می آورند.
این دتکتورها سریعترین زمان تشخیص را در یک محیط با ریسک آتش سوزی بالا فراهم می کند که نتیجتا از جان، اموال و لطمه به کسب وکار شما محافظت می نماید.
دتکتورهای VESDA به عنوان برند شماره یک جهانی دتکتورهای مکشی در سراسر جهان، قابلیت اطمینان، پایداری و عمکلرد مطمئن را به ارمغان می آورد.

دکتور مکشی مدل Vesda VLC-500

The VESDA VLC by Xtralis is an aspirating smoke detector that provides very early warning in single and small environments where space is at a premium. The VESDA VLC aspirating smoke detector is available in two versions, one that interfaces via relays only (RO) and one that interfaces via relays and VESDAnet (VN). The VESDA VLC-EX detector has been specifically
designed to provide all the benefits of ASD for the protection of hazardous applications with Zone 2 classification.

:APPLICATIONS

:The Xtralis VESDA VLC offers a simple, cost-effective solution for the protection of single and smaller environments such as
Small archives*
Production machinery*
Ceiling voids*
Prison cells*
Wet benches*
Data storage cabinets*
Critical process tools*

:CERTIFICATIONS

    • UL*
    • ULC*
    • FM*
    • LPCB*
    • VdS*
    • CCC*
    • ActivFire*
    • NF*
    • VNIIPO*
    • CE*
    • CSFM*
    • EN 54-20*
      (Class A (30 holes / 0.05% obs/m*
      (Class B (36 holes / 0.09% obs/m*
      (Class C (40 holes / 0.165% obs/m*
    • FM Hazardous Locations: Suitable for Class 1, Division 2, Groups A, B, C and D*
    • (IECEx (VLC-EX only*
    • (ATX (VLC-EX only*

 

برای دانلود کاتالوگ دتکتور مکشی مدل Vesda VLC-500  کلیک نمایید.

برای مشاهده ی مطلب در مورد Vesda VLF-250 کلیک نمایید.

/توسط
, ,

دتکتور مکشی مدل Vesda VLF-250

دتکتور مکشی مدل Vesda VLF-250 وسيله‌اي است كه هواي محل تحت پوشش را از طريق لوله به داخل يك محفظه تست مكيده و ذرات بسيار ريز دود موجود در آن را كشف مي‌نمايد.
زمانی که نیاز به تشخیص سریع حریق در مراحل اولیه ی شکل گیری آن داریم دتکتورهای نقطه ای دیگر به کار نمی آیند.
حساسيت اين دستگاه بسيار زياد بوده و با نمونه برداری از هوای دریافتی دود را تشخیص می دهد.

دتکتور مکشی مدل Vesda VLF-250The VESDA VLF by Xtralis is an aspirating smoke detector ideal for small, business-critical spaces. Available in two models, the VLF-250 covers up to 250 m2 (2,690 sq. ft.), and the VLF-500 covers areas up to 500 m2

:Applications

:The Xtralis VESDA VLF is a cost-effective solution for areas such as
Local telecommunication exchanges*
Air handling units*
Smaller server rooms*
Correctional facilities*
Control rooms*
Utility control hubs*
Switch rooms*
Railway signal hubs*
Storage facilities*
Cabinets*
Hazardous areas *
Substations*

    • :CERTIFICATIONS
    • UL*
    • ULC*
    • FM*
    • CFE*
    • LPCB*
    • VdS*
    • VNIIPO*
    • AFNOR*
    • ActivFire*
    • CE – EMC and CPD*
    • CSFM*
    • FM Hazardous Locations: Suitable for Class 1, Division 2, Groups A, B, C and D*
    • EN 54-20 (VLF-250)*
      Class A (12 holes / 0.12% obs/m)*
      Class B (12 holes / 0.35% obs/m)*
      Class C (12 holes / 0.80% obs/m)*
    • EN 54-20 (VLF-500)*
      Class A (30 holes / 0.05% obs/m)Class B (30 holes / 0.15% obs/m)
      Class C (30 holes / 0.32% obs/m)

برای دانلود کاتالوگ دتکتور مکشی مدل Vesda VLF-250 کلیک نمایید

برای مشاهده مطلب دتکتور VLC-500 اینجا را ببینید

/توسط
firewave-hochiki2
, ,

سیستم اعلام حریق بی سیم Firewave

FIREwave یک دسته محصولات بی سیم  است که در سیستم  هوشمند ESP معروف Hochiki ادغام شده است.

این یکپارچه سازی حداکثر انعطاف پذیری را در تنظیم سیستم برای پاسخگویی به نیازهای خاص ساختمانی که قرار است در آن مستقر شود ، در اختیار کاربر قرار می دهد.

FIREwave employs the latest radio technology. providing a simple and economic hybrid wireless fire detection system installation with minimal disruption to the fabric of the building and its operation.
Flexible and versatile, FIREwave is suited to a wide range of applications.
matching the requirements of any building from busy hotels to sensitive heritage buildings.FIREwave is the most flexible fire detection solution available that is simple to install and maintain.
overcoming installation and maintenance challenges on the most demanding sites.
advanced patented technology is used to achieve optimum performance.
Main Benefits of the FIREwave Range
firewave range
/توسط
WinGuard
, ,

مدیریت هوشمند ساختمان با WinGuard

کنترل جامع و یکپارچه امنیت، فن آوری های ساختمانی و سیستم های ارتباطی نصب شده در یک ساختمان، آغاز اقدامات صحیح در موارد اضطراری و دریافت دستورالعمل های مستحکم برای حل مطلوب وضعیت، همگی به سادگی با تکنولوژی  مدیریت هوشمند ساختمان با WinGuard  کنترل پنل های NSC قابل پیاده سازی است.

با کمک سیستم winguard در کنترل پنل های NSC مدیریت هوشمند ساختمان همراه با سیستم اعلام و اطفاء حریق را یکجا تجربه کنید!

WinGuard NSC

سیستم های مختلف امنیتی به صورت یکپارچه

WinGuard یک open platform فرماندهی و کنترل معماری  برای  یکپارچه سازی امنیت، اتوماسیون اداری و سیستم های ارتباطی است، برای مثال:
*سیستم های اعلام حریق  یا سیستم های دزدگیر
*کنترل دسترسی و یا دوربین مدار بسته
رابط های اختصاصی، انتقال پیام های رویداد و کنترل جامع تمامی سیستم های مرتبط را امکان پذیر می سازد.
همه حالت های سیستم به صورت جمعی در یک رابط کاربری نمایش داده می شوند. کاربر  از عملیات یکنواخت و بصری از طیف گسترده ای از سیستم های مختلف بهره خواهد برد.
علاوه بر این، WinGuard دستورالعمل های برنامه ریزی شده برای پردازش رویداد و مدیریت سریع و مطمئن وضعیت را ارائه می دهد.
هوشمند سازی ساختمان با WinGuard NSC

WinGuard has an open system structure. From a single-user system to a comprehensive network solution, a WinGuard installation can be extended step by step with workstations, interface and function modules and therefore flexibly adapts to various tasks.

Using WinGuard as centralized management system reduces purchasing and maintenance costs for other control units as well as training costs. The modular extensibility of WinGuard offers high investment protection. Due to individually adapted modules for particular functions, systems, workflows or verticals, WinGuard also responds to specific requirements.

The advantages at a glance:

  • Standalone- or Network Systems (Client / Server)
  • Upgrade / Update Possibilities
  • Data points depending on Project (expandable in steps of 100 or 1000 Datapoints)
  • more than 200 different interfaces available, optimal for NSC Fire Control Panels
  • Easy and Reliable Data import from the NSC FCP Tool
  • Dual-Screen-Operation available as an option
  • User specific designed surface
  • predefined Users
  • integrated graphics editor to import wmf, bmp and jpg files (Import of CAD files as an option)
  • separated log file for each interface
  • Event handling included
  • Mobile App for smartphones and tablet PCs
  • Optical and acoustic alerts
  • Possibilities for redundancy

As a qualified WinGuard partner, we take care of planning, project planning, software setup, hardware installation and offer qualified services, support and training.

/توسط
کنترل پنل اطفا NSC
, ,

کنترل پنل اطفا حریق NSC

کنترل پنل اطفا حریق NSC دارای کنترل اتوماتیک برق و سیستم delay می باشد.
کنترل پنل های اطفاء حریق “Solution F1” و “Solution F2”  دارای گواهینامه های VdS و EN 12094-1:2003 می باشند.

Single zone extinguishing control unit with the FCP Solution F2

The VdS approved fire control panel “Solution F2”, which has successfully established itself within several years on the market can now be used as an extinguishing control system for single areas.

Additionally to the known features:

ویژگی های کنترل پنل اطفا NSC
  • 1–2 loops, optional for addressable components by manufacturers either Apollo or Hochiki.
  • Power supply 230 VAC/24 VDC with 3.5 A.
  • Control panel with membrane keyboard and graphic display.
  • USB- and RS-232 interface.
  • Numerous In/Outputs.
  • Connectability for fire brigade periphery.
  • RS-485 interface card.
  • Single indication of detector groups.

The control panel is now capable to combine the standard FCP with an integrated electronic control device for fire extinguishing systems according to EN 12094-1.For this purpose, there is a new control board having a multiplicity of in- and outputs.

Multiple zone extinguishing control unit with the FCP Solution F1

Exactly the same control board, as for the single zone extinguishing control panel ”Solution F2”, can be mounted in the “Solution F1” to operate multiple extinguishing zones. Per each extinguishing zone there is one display board with optional key switch for the essential display and eventually required operating functions.

شرکت ایمن آریا حریق با دارا بودن نمایندگی NSC قادر به تامین نصب و راه اندازی و آموزش استفاده با این کنترل پنل ها را دارد.

جهت اطلاعات بیشتر در مورد کنترل پنل اطفا حریق NSC کاتالوگ محصول را از لینک زیر دریافت کنید:

دانلود کاتالوگ کنترل پنل اطفا NSC

/توسط