دتکتور مکشی مدل ILQ-100

دتکتور مکشی مدل ILQ-100 یک راه حل مقرون به صرفه برای تشخیص دود (ASD) است که نیازهای منحصر به فرد انواع کاربرد ها و محل ها با مساحت کوچک تا 100 متر مربع (1000 فوت مربع) را برآورده می کند. از جمله این موارد می توان به دفاتر مخابراتی راه دور، اتاق های کنترل، اتاق های سرور کوچک، کانتینرهای مرکز داده ، تجهیزات مهم ، واحدهای HVAC ، اتاق های پمپ، محفظه های ژنراتور و … اشاره کرد.


طرز کار

دتکتور  ILQ به طور فعال هوا را از منطقه محافظت شده از طریق یک شبکه لوله که در آن دو یا چهار سوراخ استفاده می شود ، می کشد. ILQ دارای دو ورودی لوله است و همیشه یک یا دو سوراخ روی هر لوله وجود دارد. سپس هوای نمونه برداری شده قبل از آنکه توسط اتاق تشخیص تجزیه و تحلیل شود ، فیلتر می شود. محفظه تشخیص از یک منبع نور لیزر و مدار گیرنده فوتوالکتریک برای تشخیص نور پراکنده ناشی از وجود دود استفاده می کند. هشدار (Pre-Alarm & Fire) و شرایط خطا با فعال کردن LED های مربوطه در نمایشگر ساده و رله های تماس خشک گزارش می شوند. این سیستم امکان پیکربندی آستانه هشدار دود و خطای جریان را متناسب با نیازهای برنامه فراهم می کند.

 پیکربندی

پیکربندی راحت و مناسب مصاحبه ILQ از طریق سوئیچ های DIP برای عملکرد واقعی خارج از جعبه در دسترس است. رابط USB برای برنامه Xtralis QSC و برنامه نرم افزار مدیریت سیستم آتش سوزی نیز در دسترس است.

ورودی ها و خروجی ها

دتکتور مکشی مدل ILQ-100 یک ورودی قابل برنامه ریزی عمومی (GPI) را برای عملکردهای نظارت از راه دور تنظیم مجدد ، بازنشانی + غیرفعال کردن ، آماده به کار و دستگاه خارجی (PSU) فراهم می کند. سه خروجی رله تماس خشک برای اعلام خطر و زنگ خطر وجود دارد.

 

ابعاد

دتکتور مکشی مدل ILQ-100

ویژگی ها:


• Laser-based absolute smoke detection
• Clean air barrier for optics protection
• Up to 100m² (1,000 ft²) coverage
• Up to 2 x 6 m (20 ft) linear or up to
2 x 9 m (30 ft) branched pipe lengths
• 2 or 4 Class A / VEWFD sampling holes
• Metric/Imperial pipe inlets
• Pre-alarm, Alarm and Fault Relays
• 5 LEDs, Pre-alarm, Fire, Fault, Filter,
Power
• Monitored on-board filter
• AutoLearn™ Smoke
• General Purpose Input (GPI)
• IP30 enclosure
• Xtralis QSC support
• USB port for PC connection
• Event log
• Low power consumption
• Configuration via DIP switches
• Various mouting options


Listings / Approvals


• UL
• ULC
• CE
• LPCB
• EN 54-20

Class A, B & C with 4 holes
• Other approvals pending
Regional approvals listings and regulatory compliance vary between
product models.

Specification


Supply voltage:
24 VDC nominal (18 to 30 VDC), externally supplied
Current consumption:
170 mA (quiescent), 190 mA (max)
Dimensions (WHD):
260 mm x 228 mm x 110 mm
(10.24 in x 8.98 in x 4.35 in)
Weight:
1.2 Kg (2.65 lbs)
Operating conditions:
Recommended Detector Ambient: 0°C to 39°C(32°F to 103°F)*
Tested to: -10°C to 55°C (14°F to 131°F)
Humidity: 0% to 95% RH, non-condensingInlet Pipe Size Accepts both metric and imperial standard pipe sizes
Metric: 25 mm external diameter
Imperial: 1.05 in (3/4” pipe) external diameter
Sampling network:
Pipe Length: Up to 2 x 6 m (2 x 20 ft) linear, up to 2 x 9 m (2 x 30 ft) branched
Sampling Holes: 2 or 4 (1 or 2 per pipe)
Sensitivity Range:
0.005% – 3.0% obs/m (0.0015% – 0.915% obs/ft)
Threshold Setting Range:
Fire Alarm: 0.15%/m – 3%/m (0.046%/ft – 0.915%/ft)
Pre-Alarm: 0.1%/m – 1.5%/m (0.03%/ft – 0.457%/ft)
Alarm and Flow Delays:0 – 60 seconds
AutoLearn:Smoke
Indication:5 LEDs for Pre-alarm, Fire, Fault, Filter and Power
IP rating:IP30
Filtration:Field replaceable and monitored
Flow Monitoring and Reporting:High and Low adjustable
Fan control:2 x fans at fixed speed, supervised
Relays:3 Relays rated 2 A @ 30 VDC (Pre-alarm, Fire, Fault)
PC Connection:USB
General Purpose Input (GPI):Reset, Reset + Disable, Stand-by and External Device (PSU) monitoring
Event Log:1,000 events
Cable termination:Screw terminal blocks (0.2-2.5 sq mm, 30-12 AWG)

Ordering Information

 

ILQ-100 ICAM ILQ Aspirated Smoke Detector
ISP-420 Surface Mount Kit
ISP-421 Flush Mount Kit
ISP-422 Replacement Filter
ISP-422-20 Replacement Filter (20 pieces)
ISP-423 Pipe Kit (Metric)
ISP-423-US Pipe Kit (Imperial)

مشاهده وب سایت رسمی https://xtralis.com/

مشاهده دتکتور های VESDA E

دتکتورهای دود OSID

دتکتورهای دود OSID
تشخیص تصویربرداری از دود در فضای باز (OSID) توسط Xtralis یک نوآوری جدید در فن آوری تشخیص دود پرتویی می باشد. که در این پست به بررسی دقیق آن می پردازیم:

Unique Detection Technology

The OSID system measures the level of smoke entering beams of light projected over an area of protection. A single OSID Imager can detect up to seven Emitters to provide a wide coverage area. Two innovations in smoke detection technology have been developed for the revolutionary OSID smoke detector.

Dual Wavelength Particle Detection

The beam projected from each Emitter contains a unique sequence of ultraviolet (UV) and infrared (IR) pulses that are synchronised with the Imager and enable the rejection of any unwanted light sources. By using two wavelengths of light to detect particles, the system is able to distinguish between particle sizes. The shorter UV wavelength interacts strongly with both small and large particles while the longer IR wavelength is affected only by larger particles. Dual wavelength path loss measurements therefore enable the detector to provide repeatable smoke obscuration measurements, while rejecting the presence of transient dust particles or solid intruding objects.

Optical Imaging with a CMOS Imaging Chip

An optical imaging array in the OSID Imager provides the detector with a wide viewing angle to locate and track multiple Emitters. Consequently, the system can tolerate a much less precise installation and can compensate for the drift caused by natural shifts in building structures.

Optical filtering, high-speed image acquisition and intelligent software algorithms also enable the OSID system to provide new levels of stability and sensitivity with greater immunity to high level lighting variability.

Operation

Status information (Fire Alarm, Trouble and Power) is communicated through the Imager via Status LEDs, dedicated Trouble and Alarm relays, and the Remote Indicator interface. Specific Trouble (Fault) conditions are identified through coded flashes of the Trouble LED.

An internal heating option is also provided on the Imager to prevent condensation on the optical surface, and a reset input enables an external signal to reset the device.

Simple Installation and Maintenance

The OSID system consists of up to seven Emitters for the 90° Imager unit, located along the perimeter of the protected area, and an Imager mounted opposite. Each component can be mounted directly to the surface or can be secured with the supplied mounting brackets. Battery powered Emitters with three or five years battery life are also available to reduce installation time and cost.

Features

• Maximum detection range of 150 m (492 ft) for the OSI-10
• Dual wavelength LED-based smoke detection
• Optical imaging with CMOS imaging chip
• On-board event log for fault and alarm diagnostics
• High tolerance to false alarm due to building movement
• High tolerance to transient dust, steam and intrusion of solid objects
• Easy alignment with large adjustment and viewing angles
• No need for precise alignment
• Tolerant of alignment drift
• Automatic commisioning in under ten minutes
• Simple DIP switch configuration
• Simple and easy maintenance requirements
• Three selectable alarm thresholds
• Status LEDs for Fire, Trouble and Power
• Conventional alarm interface for straightforward fire system integration

Configuration Options

OSID systems may be configured to suit a range of detection spaces by selecting the number of Emitters and type of Imager. Each type of Imager differs by the lens used in the unit, which determines the field of view and range of the system.

دتکتورهای دود OSID

Emitter / Imager Dimensions

دتکتورهای دود OSID

برای مشاهده ی  سایر محصولات Xtralis به اینجا و برای کسب اطلاعات بیشتر  در ارتباط با دتکتورهای دود OSID به اینجا مراجعه کنید.

vesda e

دتکتور سری VESDA E پرقدرت ترین دتکتور جهت استفاده در فضا های خیلی بزرگ بصورت آدرس پذیر می باشند.
قابلیت 40 خروجی آدرس پذیردر هر دتکتور و قابلیت آدرس دهی به همه آن ها این دتکتور ها را متمایز می کند.
vesda E

VESDA Smoke+

According to tests observed & verified by independent experts, VESDA is the best ASD system available. With VESDA-E, Xtralis has taken the standard for ASD systems to a new level of excellence. Our patented Flair™ technology delivers innovation that makes VESDA-E better than even the best (VESDA)!

VESDA Flex

Future-proof expandability & field programmability for maximum flexibility
StaX Modules allow for hardware expansion without disrupting the detector installation or pipe network Integrated gas detection provides a superior solution at half the cost of competing solutions

VESDA Verify

Provides unprecedented situational awareness that drastically reduces verification time and delivers more efficient & effective response without nuisance alarms Addressability: VESDA Offer Different Addressability Solutions For Different Applications Different Solutions to Pinpoint Location of Fire Incident results in quicker and more efficient response

VESDA Connect

Flexible networking & programming options that reduce maintenance & monitoring costs by up to 50% through extensive connectivity options & remote diagnostics Enables connectivity with Xtralis VSC, VSM4, Xtralis EMS as well as providing an embedded
webserver and E-mail alerts VESDA WiFi: Integration of wireless 802.11n enables connectivity with hand-held iOS and Android devices VESDA USB: Easily connect to a PC for configuration and maintenance or USB flash drive for data collection VESDAnet & Relays: Connect up to 200 VESDA-E devices on a single loop

VESDA TCO

VESDA-E provides lifetime of value, reliability, & protection – with VESDA-E you can reduce Total Cost of Ownership by 15%! Plug & play installation provides improved installation experience & reduced installation cost Design-less pipe networks offer the fastest time to VESDA protection… ever! Vast monitoring options allow efficient integration to business process and emergency response plans Backward compatible :
easy upgrade while protecting your investment

برای دانلود کاتالوگ دتکتور سری VESDA E اینجا را کلیک کنید.

vesda filters

فیلتر های دتکتور های مکشی Vesda  شامل دسته های زیر می باشد:

فیلتر های دتکتور های مکشی داخلی Vesda

فیلتر های دتکتور های مکشی خطی Vesda(inline )

———————————————————————————-

1. فیلتر های دتکتور های مکشی داخلی Vesda

The VESDA replacement filter cartridge (VSP-005 for single units and VSP025 for a pack of 20) is used to replace filter cartridges in VESDA VLC, VLF, VLP and VLS detectors.

فیلتر های دتکتور های مکشی Vesda

Features

• Easy swap replacement filter
• Fits VLC, VLF, VLP and VLS VESDA detectors
• Available singly or in packs of 20
• Two Stage Filtration
– First stage removes particles in excess of 20 microns
– Second stage is ultra-fine and removes more than 99% of particles of 0.3 microns or larger  to provide a clean air barrier for optics protection.

Dimensions
90 mm x 63 mm x 30 mm (3.5 in. x 2.5 in. x 1.2 in.)

Ordering Information

VSP-005                     Single cartridge
VSP-025                     Pack of 20 cartridges

2. فیلتر های دتکتور های مکشی خطی (inline)

Introduction

The Xtralis In-Line Filter provides Xtralis customers the ability to address a wide array of harsh environments with high levels of airborne contaminants in a simple and cost-effective manner.

Description

Unlike other in-line fi ltration solutions available on the market, the Xtralis In-Line Filter provides superior performance in terms of improving detector longevity and reducing maintenance frequency. Having tapered inlet and outlet means the Xtralis In-Line Filter is easily fi tted in line with the sampling pipe without the need for any additional pipe fi ttings hence reducing the cost of installation. Filter elements can be easily replaced without having to remove the fi lter from the pipe network hence simplifying maintenance. Its elegant design blends in seamlessly into the installation where up to four can be installed side-by-side on Xtralis multi-pipe installations.

How it works

The arrows on the Xtralis In-Line Filter cover indicate the direction of airfl ow aiding ease of correct mounting. As the airfl ow enters the fi lter housing it impinges on the fi lter elements which are positioned at a certain angle within the fi lter housing. This arrangement maximizes the fi lter element surface area subjected to the airfl ow hence promoting a longer fi lter life.

Features

• Suitable for all Xtralis Aspirating Smoke Detectors
• Improved detector longevity in applications with high levels of air-borne contamination
• Reduces maintenance intervals, thus reducing total cost of ownership
• Requires no additional pipe fi ttings thus reducing cost of installation
• Improved aesthetics
• Vertical or horizontal mounting
• Compatible with metric (25mm OD) and imperial (1” OD) pipes eliminating the need for pipe adaptors

Dimensions

 

vesda inline filter

Ordering Information

• VSP-850-G: Xtralis In-Line Filter (Grey)
• VSP-850-R: Xtralis In-Line Filter (Red)
• VSP-850-M: Xtralis In-Line Filter (Metal)
• VSP-855-4: Xtralis In-Line Filter Elements 4 pack
• VSP-855-20: Xtralis In-Line Filter Elements 20 pack

Vesda

دکتور مکشی مدل Vesda VLC-500  از طریق مکش مداوم هوا به داخل شبکه لوله ای کارایی بالا را به ارمغان می آورند.
این دتکتورها سریعترین زمان تشخیص را در یک محیط با ریسک آتش سوزی بالا فراهم می کند که نتیجتا از جان، اموال و لطمه به کسب وکار شما محافظت می نماید.
دتکتورهای VESDA به عنوان برند شماره یک جهانی دتکتورهای مکشی در سراسر جهان، قابلیت اطمینان، پایداری و عمکلرد مطمئن را به ارمغان می آورد.

دکتور مکشی مدل Vesda VLC-500

The VESDA VLC by Xtralis is an aspirating smoke detector that provides very early warning in single and small environments where space is at a premium. The VESDA VLC aspirating smoke detector is available in two versions, one that interfaces via relays only (RO) and one that interfaces via relays and VESDAnet (VN). The VESDA VLC-EX detector has been specifically
designed to provide all the benefits of ASD for the protection of hazardous applications with Zone 2 classification.

:APPLICATIONS

:The Xtralis VESDA VLC offers a simple, cost-effective solution for the protection of single and smaller environments such as
Small archives*
Production machinery*
Ceiling voids*
Prison cells*
Wet benches*
Data storage cabinets*
Critical process tools*

:CERTIFICATIONS

    • UL*
    • ULC*
    • FM*
    • LPCB*
    • VdS*
    • CCC*
    • ActivFire*
    • NF*
    • VNIIPO*
    • CE*
    • CSFM*
    • EN 54-20*
      (Class A (30 holes / 0.05% obs/m*
      (Class B (36 holes / 0.09% obs/m*
      (Class C (40 holes / 0.165% obs/m*
    • FM Hazardous Locations: Suitable for Class 1, Division 2, Groups A, B, C and D*
    • (IECEx (VLC-EX only*
    • (ATX (VLC-EX only*

 

برای دانلود کاتالوگ دتکتور مکشی مدل Vesda VLC-500  کلیک نمایید.

برای مشاهده ی مطلب در مورد Vesda VLF-250 کلیک نمایید.

دتکتور مکشی مدل Vesda VLF-250 وسيله‌اي است كه هواي محل تحت پوشش را از طريق لوله به داخل يك محفظه تست مكيده و ذرات بسيار ريز دود موجود در آن را كشف مي‌نمايد.
زمانی که نیاز به تشخیص سریع حریق در مراحل اولیه ی شکل گیری آن داریم دتکتورهای نقطه ای دیگر به کار نمی آیند.
حساسيت اين دستگاه بسيار زياد بوده و با نمونه برداری از هوای دریافتی دود را تشخیص می دهد.

دتکتور مکشی مدل Vesda VLF-250The VESDA VLF by Xtralis is an aspirating smoke detector ideal for small, business-critical spaces. Available in two models, the VLF-250 covers up to 250 m2 (2,690 sq. ft.), and the VLF-500 covers areas up to 500 m2

:Applications

:The Xtralis VESDA VLF is a cost-effective solution for areas such as
Local telecommunication exchanges*
Air handling units*
Smaller server rooms*
Correctional facilities*
Control rooms*
Utility control hubs*
Switch rooms*
Railway signal hubs*
Storage facilities*
Cabinets*
Hazardous areas *
Substations*

    • :CERTIFICATIONS
    • UL*
    • ULC*
    • FM*
    • CFE*
    • LPCB*
    • VdS*
    • VNIIPO*
    • AFNOR*
    • ActivFire*
    • CE – EMC and CPD*
    • CSFM*
    • FM Hazardous Locations: Suitable for Class 1, Division 2, Groups A, B, C and D*
    • EN 54-20 (VLF-250)*
      Class A (12 holes / 0.12% obs/m)*
      Class B (12 holes / 0.35% obs/m)*
      Class C (12 holes / 0.80% obs/m)*
    • EN 54-20 (VLF-500)*
      Class A (30 holes / 0.05% obs/m)Class B (30 holes / 0.15% obs/m)
      Class C (30 holes / 0.32% obs/m)

برای دانلود کاتالوگ دتکتور مکشی مدل Vesda VLF-250 کلیک نمایید

برای مشاهده مطلب دتکتور VLC-500 اینجا را ببینید